2024 Jaguar I-PACE Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Jaguar I-PACE, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120.65 (5x4.75") |
|---|---|
| Lug Nut / Bolt Size | 1/2 20 |
| Center Bore (CB) | 73.8 mm |
| Offset (ET) | 33 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x120.65 is commonly referred to as 5x4.75" in US Standard.
2024 I-PACE — Year-Specific Fitment Context
The 2024 model year is the final year of the Jaguar I-PACE's 5x120.65 bolt pattern run (since 2021). Wheels from any 2021–2024 Jaguar I-PACE are cross-compatible with the 2024 model. Across its full production run (2019–2024), the I-PACE has also used: 5x108.
Jaguar I-PACE Bolt Pattern by Year
The table below shows how the I-PACE's wheel specifications have changed over the years. The 2024 model year is highlighted.
5x120.65 Pattern Context
This bolt pattern appears on 202 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x120.65:
Expert Buying Guide for 2024 Jaguar I-PACE
For the 2024 Jaguar I-PACE, the bolt pattern is 5x120.65 with a center bore of 73.8mm. When selecting aftermarket wheels, hub-centric rings are essential to ensure proper centering and prevent vibrations. The offset is sensitive; the factory range is around 33mm, and deviations can cause rubbing or clearance issues. Always verify lug nut compatibility: the thread pitch is 1/2-20, and the seat type is typically cone (60-degree) or ball seat. Using incorrect lug nuts can lead to wheel loosening. Note that 2021–2024 I-PACE wheels are cross-compatible, but earlier models (2019–2020) use 5x108, so adapters or different wheels are required.
Historical Fitment Data Reference
In our dataset, Jaguar I-PACE appears from 2019 to 2024 (6 model years). Across model years, this model appears with 2 bolt patterns (5x108, 5x120.65).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 15.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 lb-ft after 50 miles of driving to ensure proper seating.
- ✅ If using aftermarket wheels, confirm the hub bore is at least 73.8mm; use hub-centric rings if larger.
- ✅ Avoid offsets below 25mm or above 40mm to prevent fender rubbing or brake caliper contact.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Jaguar I-PACE — Frequently Asked Questions
What is the bolt pattern for a 2024 Jaguar I-PACE?
The 2024 Jaguar I-PACE uses a 5x120.65 bolt pattern (also called lug pattern or PCD). The center bore is 73.8mm and the offset is 33mm.
What other years of Jaguar I-PACE have the same bolt pattern as the 2024?
The Jaguar I-PACE uses the 5x120.65 pattern from 2021 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
Will wheels from another Jaguar fit my 2024 I-PACE?
Only if they share the exact same 5x120.65 bolt pattern, a compatible offset, and a center bore equal to or larger than 73.8mm.
How do I measure the bolt pattern on my 2024 Jaguar?
The 2024 I-PACE uses a 5x120.65 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What does 33mm offset mean for the 2024 I-PACE?
An offset of 33mm means the wheel's mounting surface is 33mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Jaguar.
Do 2024 Jaguar I-PACEs use lug bolts or lug nuts?
The 2024 I-PACE requires 1/2 20 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset