1998 Jaguar XJ Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1998 Jaguar XJ, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120.65 (5x4.75") |
|---|---|
| Lug Nut / Bolt Size | M 1/2" |
| Center Bore (CB) | 73.8 mm |
| Offset (ET) | 33 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x120.65 is commonly referred to as 5x4.75" in US Standard.
1998 XJ — Year-Specific Fitment Context
The 1998 Jaguar XJ is in year 7 of 13 using the 5x120.65 pattern (1992–2004). Wheels from any 1992–2004 Jaguar XJ are cross-compatible with the 1998 model. Across its full production run (1992–2019), the XJ has also used: 5x108.
Jaguar XJ Bolt Pattern by Year
The table below shows how the XJ's wheel specifications have changed over the years. The 1998 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x120.65 | 73.8 | 33 |
| 1993 | 5x120.65 | 73.8 | 33 |
| 1994 | 5x120.65 | 73.8 | 33 |
| 1995 | 5x120.65 | 73.8 | 33 |
| 1996 | 5x120.65 | 73.8 | 33 |
| 1997 | 5x120.65 | 73.8 | 33 |
| ▸ 1998 | 5x120.65 | 73.8 | 33 |
| 1999 | 5x120.65 | 73.8 | 33 |
| 2000 | 5x120.65 | 73.8 | 33 |
| 2001 | 5x120.65 | 73.8 | 33 |
| 2002 | 5x120.65 | 73.8 | 33 |
| 2003 | 5x120.65 | 73.8 | 33 |
| 2004 | 5x120.65 | 73.8 | 33 |
| 2005 | 5x108 | 63.4 | 45 |
| 2006 | 5x108 | 63.4 | 45 |
| 2007 | 5x108 | 63.4 | 45 |
| 2008 | 5x108 | 63.4 | 45 |
| 2009 | 5x108 | 63.4 | 45 |
| 2011 | 5x108 | 63.4 | 45 |
| 2012 | 5x108 | 63.4 | 45 |
| 2013 | 5x108 | 63.4 | 45 |
| 2014 | 5x108 | 63.4 | 45 |
| 2015 | 5x108 | 63.4 | 45 |
| 2016 | 5x108 | 63.4 | 45 |
| 2017 | 5x108 | 63.4 | 45 |
| 2018 | 5x108 | 63.4 | 45 |
| 2019 | 5x108 | 63.4 | 45 |
5x120.65 Pattern Context
This bolt pattern appears on 202 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x120.65:
Expert Buying Guide for 1998 Jaguar XJ
For your 1998 Jaguar XJ, the bolt pattern is 5x120.65mm with a center bore of 73.8mm. When selecting aftermarket wheels, hub-centric rings are essential to match the bore precisely, preventing vibrations and ensuring proper load distribution. The offset is critical; the factory spec is 33mm, but a range of 30-38mm is acceptable. Deviating too far can cause rubbing or clearance issues. Always use the correct lug nuts: M12x1.5 thread pitch with a 60-degree conical seat. Never use ball-seat lug nuts, as they can loosen. Re-torque lug nuts after 50-100 miles of driving to maintain safety.
Historical Fitment Data Reference
In our dataset, Jaguar XJ appears from 1992 to 2019 (27 model years). Across model years, this model appears with 2 bolt patterns (5x108, 5x120.65).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 12.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings with aftermarket wheels to match the 73.8mm center bore; otherwise, vibrations may occur.
- ✅ Stick to an offset range of 30-38mm; offsets outside this can cause tire rubbing on the fenders or suspension components.
- ✅ Re-torque lug nuts to 76-88 lb-ft after 50-100 miles, as wheels can settle and loosen during initial driving.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1998 Jaguar XJ — Frequently Asked Questions
What is the bolt pattern for a 1998 Jaguar XJ?
The 1998 Jaguar XJ uses a 5x120.65 bolt pattern (also called lug pattern or PCD). The center bore is 73.8mm and the offset is 33mm.
What other years of Jaguar XJ have the same bolt pattern as the 1998?
The Jaguar XJ uses the 5x120.65 pattern from 1992 through 2004. Wheels from any of these model years are dimensionally compatible with the 1998, provided the offset and center bore also match.
How do I measure the bolt pattern on my 1998 Jaguar?
The 1998 XJ uses a 5x120.65 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Why is matching the 73.8mm center bore important for the 1998 XJ?
The 73.8mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the PCD for a 1998 Jaguar XJ?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1998 XJ, the PCD is 5x120.65.
Do 1998 Jaguar XJs use lug bolts or lug nuts?
The 1998 XJ requires M 1/2" hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset