2000 Jaguar XK Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Jaguar XK, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120.65 (5x4.75") |
|---|---|
| Lug Nut / Bolt Size | M 1/2" |
| Center Bore (CB) | 73.8 mm |
| Offset (ET) | 33 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x120.65 is commonly referred to as 5x4.75" in US Standard.
2000 XK — Year-Specific Fitment Context
The 2000 Jaguar XK is in year 4 of 9 using the 5x120.65 pattern (1997–2005). Wheels from any 1997–2005 Jaguar XK are cross-compatible with the 2000 model. Across its full production run (1997–2015), the XK has also used: 5x108.
Jaguar XK Bolt Pattern by Year
The table below shows how the XK's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1997 | 5x120.65 | 73.8 | 33 |
| 1998 | 5x120.65 | 73.8 | 33 |
| 1999 | 5x120.65 | 73.8 | 33 |
| ▸ 2000 | 5x120.65 | 73.8 | 33 |
| 2001 | 5x120.65 | 73.8 | 33 |
| 2002 | 5x120.65 | 73.8 | 33 |
| 2003 | 5x120.65 | 73.8 | 33 |
| 2004 | 5x120.65 | 73.8 | 33 |
| 2005 | 5x120.65 | 73.8 | 33 |
| 2006 | 5x108 | 63.4 | 45 |
| 2007 | 5x108 | 63.4 | 45 |
| 2008 | 5x108 | 63.4 | 45 |
| 2009 | 5x108 | 63.4 | 45 |
| 2010 | 5x108 | 63.4 | 45 |
| 2011 | 5x108 | 63.4 | 45 |
| 2012 | 5x108 | 63.4 | 45 |
| 2013 | 5x108 | 63.4 | 45 |
| 2014 | 5x108 | 63.4 | 45 |
| 2015 | 5x108 | 63.4 | 45 |
5x120.65 Pattern Context
This bolt pattern appears on 202 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x120.65:
Expert Buying Guide for 2000 Jaguar XK
For your 2000 Jaguar XK, the bolt pattern is 5x120.65mm with a center bore of 73.8mm. When selecting aftermarket wheels, ensure they have a larger center bore and use hub-centric rings to prevent vibration. The offset is critical: stock is 33mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (M12x1.5) and seat type—use ball-seat lug nuts for factory wheels or cone-seat for most aftermarket wheels. Improper lug nuts can lead to wheel detachment. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Jaguar XK appears from 1997 to 2015 (19 model years). Across model years, this model appears with 2 bolt patterns (5x108, 5x120.65).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 12.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 76 lb-ft after 50-100 miles of driving.
- ✅ Avoid using wheels from 2006+ XK models (5x108 pattern) without adapters.
- ✅ Check inner clearance for aftermarket wheels; the XK has tight rear suspension clearance.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Jaguar XK — Frequently Asked Questions
What is the bolt pattern for a 2000 Jaguar XK?
The 2000 Jaguar XK uses a 5x120.65 bolt pattern (also called lug pattern or PCD). The center bore is 73.8mm and the offset is 33mm.
What other years of Jaguar XK have the same bolt pattern as the 2000?
The Jaguar XK uses the 5x120.65 pattern from 1997 through 2005. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Will wheels from another Jaguar fit my 2000 XK?
Only if they share the exact same 5x120.65 bolt pattern, a compatible offset, and a center bore equal to or larger than 73.8mm.
How do I measure the bolt pattern on my 2000 Jaguar?
The 2000 XK uses a 5x120.65 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2000 Jaguar XK?
The factory center bore (hub bore) for the 2000 Jaguar XK is 73.8mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2000 Jaguar XK?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2000 XK, the PCD is 5x120.65.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset