2025 Jeep Gladiator Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2025 Jeep Gladiator, along with offset and center bore data.
2025 Jeep Gladiator Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x127 (5x5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 71.5 mm |
| Offset (ET) | 44 |
| Torque Specs | 130 ft-lbs (176 Nm) |
Imperial Match: 5x127 is commonly referred to as 5x5" in US Standard.
2025 Gladiator — Year-Specific Fitment Context
The 2025 model year is the final year of the Jeep Gladiator's 5x127 bolt pattern run (since 2020). Wheels from any 2020–2025 Jeep Gladiator are cross-compatible with the 2025 model.
Jeep Gladiator Bolt Pattern by Year
The table below shows how the Gladiator's wheel specifications have changed over the years. The 2025 model year is highlighted.
5x127 Pattern Context
This bolt pattern appears on 270 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x127:
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 130 ft-lbs (176 Nm), then re-check torque after 50-100 km (30-60 miles).
2025 Jeep Gladiator — Frequently Asked Questions
What is the bolt pattern for a 2025 Jeep Gladiator?
The 2025 Jeep Gladiator uses a 5x127 bolt pattern (also called lug pattern or PCD). The center bore is 71.5mm and the offset is 44mm.
What other years of Jeep Gladiator have the same bolt pattern as the 2025?
The Jeep Gladiator uses the 5x127 pattern from 2020 through 2025. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2025 Jeep Gladiator?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2025 Jeep Gladiator?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2025 Gladiator, the PCD is 5x127.
Can I put aftermarket wheels on my 2025 Jeep Gladiator?
Absolutely. Just ensure the aftermarket wheels have a 5x127 bolt pattern, an offset near 44mm, and a center bore of at least 71.5mm (using hub rings if larger).
How do I measure the bolt pattern on my 2025 Jeep?
The 2025 Gladiator uses a 5x127 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset