2006 Land Rover LR3 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Land Rover LR3, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 72.6 mm |
| Offset (ET) | 53 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2006 LR3 — Year-Specific Fitment Context
The 2006 Land Rover LR3 is in year 2 of 5 using the 5x120 pattern (2005–2009). Wheels from any 2005–2009 Land Rover LR3 are cross-compatible with the 2006 model.
Land Rover LR3 Bolt Pattern by Year
The table below shows how the LR3's wheel specifications have changed over the years. The 2006 model year is highlighted.
Fitment Notes
The 2006 Land Rover LR3 has a bolt pattern of 5x120.
This means it is a 5 lug pattern with a circle diameter of 120mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Land Rover LR3 appears from 2005 to 2009 (5 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
2006 Land Rover LR3 — Frequently Asked Questions
What is the bolt pattern for a 2006 Land Rover LR3?
The 2006 Land Rover LR3 uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 72.6mm and the offset is 53mm.
What other years of Land Rover LR3 have the same bolt pattern as the 2006?
The Land Rover LR3 uses the 5x120 pattern from 2005 through 2009. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
Do 2006 Land Rover LR3s use lug bolts or lug nuts?
The 2006 LR3 requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2006 Land Rover LR3?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2006 Land Rover LR3?
Absolutely. Just ensure the aftermarket wheels have a 5x120 bolt pattern, an offset near 53mm, and a center bore of at least 72.6mm (using hub rings if larger).
What is the center bore of a 2006 Land Rover LR3?
The factory center bore (hub bore) for the 2006 Land Rover LR3 is 72.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Fitment Checklist Before You Buy Wheels
- Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Land Rover LR3 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2005-2009 (5 model years).
- Observed bolt-pattern variants: 1 (5x120).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2006 Land Rover LR3, please report it via our About page contact so we can verify and update this record.