2009 Maybach 62 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 Maybach 62, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | M14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-40mm |
| Torque Specs | 100 ft-lbs (135 Nm) |
2009 62 — Year-Specific Fitment Context
The 2009 Maybach 62 is in year 5 of 8 using the 5x112 pattern (2005–2012). Wheels from any 2005–2012 Maybach 62 are cross-compatible with the 2009 model.
Maybach 62 Bolt Pattern by Year
The table below shows how the 62's wheel specifications have changed over the years. The 2009 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2009 Maybach 62
For the 2009 Maybach 62, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels must use hub-centric rings to avoid vibration and ensure proper load distribution. The offset range is tight at 30-40mm; deviations risk rubbing or clearance issues. Always use M14x1.5 lug nuts with the correct seat (cone or ball) to prevent loosening. Verify wheel load rating meets the vehicle's heavy weight. Cross-compatible with 2005-2012 Maybach 62 models.
Historical Fitment Data Reference
In our dataset, Maybach 62 appears from 2005 to 2012 (8 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 70.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to ensure proper seating.
- ✅ Avoid wheels with offset outside 30-40mm to prevent brake caliper or suspension interference.
- ✅ Use hub-centric rings made of aluminum or steel for aftermarket wheels to match the 66.6mm bore precisely.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2009 Maybach 62 — Frequently Asked Questions
What is the bolt pattern for a 2009 Maybach 62?
The 2009 Maybach 62 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-40mmmm.
What other years of Maybach 62 have the same bolt pattern as the 2009?
The Maybach 62 uses the 5x112 pattern from 2005 through 2012. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.
What does 30-40mmmm offset mean for the 2009 62?
An offset of 30-40mmmm means the wheel's mounting surface is 30-40mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Maybach.
How tight should I torque the lug nuts on a 2009 Maybach 62?
Refer to your owner's manual for exact specs, but always tighten the M14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Do 2009 Maybach 62s use lug bolts or lug nuts?
The 2009 62 requires M14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 2009 Maybach 62?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 30-40mmmm, and a center bore of at least 66.6mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset