1992 Mercedes-Benz 300 CE Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 Mercedes-Benz 300 CE, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
1992 300 CE — Year-Specific Fitment Context
The 1992 model year marks the beginning of the Mercedes-Benz 300 CE's 5x112 bolt pattern era, which continued through 1993 (2 consecutive years). Wheels from any 1992–1993 Mercedes-Benz 300 CE are cross-compatible with the 1992 model.
Mercedes-Benz 300 CE Bolt Pattern by Year
The table below shows how the 300 CE's wheel specifications have changed over the years. The 1992 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 1992 | 5x112 | 66.6 | 30-50 |
| 1993 | 5x112 | 66.6 | 30-50 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 1992 Mercedes-Benz 300 CE
For your 1992 Mercedes-Benz 300 CE, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibrations. The offset range is 30-50mm; staying within this ensures proper clearance and handling. Always use 14x1.5 lug nuts with the correct seat type (cone or ball) to avoid wheel loosening. Mismatched seating can cause dangerous failures. Prioritize safety: verify all specs before purchase.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz 300 CE appears from 1992 to 1993 (2 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 110 Nm after 50-100 miles of driving.
- ✅ Ensure aftermarket wheels have a 66.6mm bore or use hub-centric rings; avoid wobble.
- ✅ Check offset carefully: too low (30mm) may rub fenders, too high (50mm) may contact suspension.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1992 Mercedes-Benz 300 CE — Frequently Asked Questions
What is the bolt pattern for a 1992 Mercedes-Benz 300 CE?
The 1992 Mercedes-Benz 300 CE uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.
What other years of Mercedes-Benz 300 CE have the same bolt pattern as the 1992?
The Mercedes-Benz 300 CE uses the 5x112 pattern from 1992 through 1993. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.
Can I put aftermarket wheels on my 1992 Mercedes-Benz 300 CE?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 30-50mm, and a center bore of at least 66.6mm (using hub rings if larger).
How tight should I torque the lug nuts on a 1992 Mercedes-Benz 300 CE?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another Mercedes-Benz fit my 1992 300 CE?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.6mm.
Do 1992 Mercedes-Benz 300 CEs use lug bolts or lug nuts?
The 1992 300 CE requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset