1992 Mercedes-Benz 500 E Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 Mercedes-Benz 500 E, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
1992 500 E — Year-Specific Fitment Context
The 1992 model year marks the beginning of the Mercedes-Benz 500 E's 5x112 bolt pattern era, which continued through 1993 (2 consecutive years). Wheels from any 1992–1993 Mercedes-Benz 500 E are cross-compatible with the 1992 model.
Mercedes-Benz 500 E Bolt Pattern by Year
The table below shows how the 500 E's wheel specifications have changed over the years. The 1992 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 1992 | 5x112 | 66.6 | 30-50 |
| 1993 | 5x112 | 66.6 | 30-50 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 1992 Mercedes-Benz 500 E
For your 1992 Mercedes-Benz 500 E, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 66.6mm or 73.1mm); if larger, use hub-centric rings to prevent vibrations. The offset range is 30-50mm; staying within this ensures proper clearance and handling. Always use lug nuts with the correct thread pitch (14x1.5) and seat type—factory wheels use ball seats, while many aftermarket wheels require conical (60-degree) seats. Mixing seat types can cause wheel loosening. Safety first: verify lug nut compatibility before installation.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz 500 E appears from 1992 to 1993 (2 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Check for caliper clearance when using low-offset wheels (near 30mm) to avoid rubbing.
- ✅ Use a torque wrench set to 110-130 Nm (81-96 lb-ft) for final tightening; never exceed 130 Nm.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1992 Mercedes-Benz 500 E — Frequently Asked Questions
What is the bolt pattern for a 1992 Mercedes-Benz 500 E?
The 1992 Mercedes-Benz 500 E uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.
What other years of Mercedes-Benz 500 E have the same bolt pattern as the 1992?
The Mercedes-Benz 500 E uses the 5x112 pattern from 1992 through 1993. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.
What is the PCD for a 1992 Mercedes-Benz 500 E?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1992 500 E, the PCD is 5x112.
Will wheels from another Mercedes-Benz fit my 1992 500 E?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.6mm.
What is the factory wheel offset for a 1992 Mercedes-Benz 500 E?
The OEM offset for the 1992 500 E is typically around 30-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 1992 Mercedes-Benz 500 E?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 30-50mm, and a center bore of at least 66.6mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset