2026 Mercedes-Benz GLA-Class Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Mercedes-Benz GLA-Class is 5x112. It has a center bore of 66.6 mm, an offset range of 35-45, and utilizes 14x1.5 (Ball seat, 17mm hex) fasteners tightened to 96 ft-lbs (130 Nm).
2026 Mercedes-Benz GLA-Class Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.6 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 96 ft-lbs (130 Nm) |
2026 GLA-Class — Year-Specific Fitment Context
The 2026 model year is the final year of the Mercedes-Benz GLA-Class's 5x112 bolt pattern run (since 2015). Wheels from any 2015–2026 Mercedes-Benz GLA-Class are cross-compatible with the 2026 model.
Mercedes-Benz GLA-Class Bolt Pattern by Year
Looking for all generations? View the complete Mercedes-Benz GLA-Class (2015–2026) Bolt Pattern & Generation Guide →
The table below shows how the GLA-Class's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Mercedes-Benz GLA-Class Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2026 Mercedes-Benz GLA-Class, donor rims must match the 5x112 PCD and have a center bore of at least 66.6 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 BMW X5 | 66.6 mm (Exact) | 35-45 | 14x1.25 (Cone) |
| 2021 BMW X5 M | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2019 BMW X6 | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2019 BMW X6 M | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2025 BMW X7 | 66.6 mm (Exact) | 35-45 | 14x1.25 (Cone) |
| 2025 BMW XM | 66.6 mm (Exact) | 35-45 | 14x1.25 (Cone) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 96 ft-lbs (130 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Mercedes-Benz GLA-Class — Frequently Asked Questions
What is the bolt pattern for a 2026 Mercedes-Benz GLA-Class?
The 2026 Mercedes-Benz GLA-Class uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 35-45mm.
What other years of Mercedes-Benz GLA-Class have the same bolt pattern as the 2026?
The Mercedes-Benz GLA-Class uses the 5x112 pattern from 2015 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Can I use spacers on my 2026 Mercedes-Benz GLA-Class?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 66.6mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What is the factory wheel offset for a 2026 Mercedes-Benz GLA-Class?
The OEM offset for the 2026 GLA-Class is typically around 35-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 66.6mm center bore important for the 2026 GLA-Class?
The 66.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the PCD for a 2026 Mercedes-Benz GLA-Class?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 GLA-Class, the PCD is 5x112.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →