2026 Mercedes-Benz GLB-Class Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Mercedes-Benz GLB-Class is 5x112. It has a center bore of 66.6 mm, an offset range of 35-45, and utilizes 14x1.5 (Ball seat, 17mm hex) fasteners tightened to 96 ft-lbs (130 Nm).
2026 Mercedes-Benz GLB-Class Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.6 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 96 ft-lbs (130 Nm) |
2026 GLB-Class — Year-Specific Fitment Context
The 2026 model year is the final year of the Mercedes-Benz GLB-Class's 5x112 bolt pattern run (since 2024). Wheels from any 2024–2026 Mercedes-Benz GLB-Class are cross-compatible with the 2026 model.
Mercedes-Benz GLB-Class Bolt Pattern by Year
Looking for all generations? View the complete Mercedes-Benz GLB-Class (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the GLB-Class's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Mercedes-Benz GLB-Class Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2026 Mercedes-Benz GLB-Class, donor rims must match the 5x112 PCD and have a center bore of at least 66.6 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2021 Audi RS 6 | 66.6 mm (Exact) | 30-45 | 14x1.5 (Ball) |
| 2025 Audi RS 6 Avant | 66.5 mm (Exact) | 35-45 | 14x1.5 (Ball) |
| 2017 Audi RS 7 | 66.5 mm (Exact) | 30-45 | 14x1.5 (Ball) |
| 2023 Audi RS e-tron GT | 66.6 mm (Exact) | 38 | B 14x1.50 (Ball) |
| 2025 Audi RS Q8 | 66.5 mm (Exact) | 25-35 | 14x1.5 (Ball) |
| 2025 Audi S e-tron GT | 66.5 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 96 ft-lbs (130 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Mercedes-Benz GLB-Class — Frequently Asked Questions
What is the bolt pattern for a 2026 Mercedes-Benz GLB-Class?
The 2026 Mercedes-Benz GLB-Class uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 35-45mm.
What other years of Mercedes-Benz GLB-Class have the same bolt pattern as the 2026?
The Mercedes-Benz GLB-Class uses the 5x112 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Why is matching the 66.6mm center bore important for the 2026 GLB-Class?
The 66.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What does 35-45mm offset mean for the 2026 GLB-Class?
An offset of 35-45mm means the wheel's mounting surface is 35-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mercedes-Benz.
What is the center bore of a 2026 Mercedes-Benz GLB-Class?
The factory center bore (hub bore) for the 2026 Mercedes-Benz GLB-Class is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2026 Mercedes-Benz GLB-Class?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →