2025 Audi S e-tron GT Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Audi S e-tron GT is 5x112. It has a center bore of 66.5 mm, an offset range of Not Applicable, and utilizes 14x1.5 (Ball seat, 17mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2025 Audi S e-tron GT Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.5 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2025 S e-tron GT — Year-Specific Fitment Context
The 2025 model year marks the beginning of the Audi S e-tron GT's 5x112 bolt pattern era, which continued through 2026 (2 consecutive years). Wheels from any 2025–2026 Audi S e-tron GT are cross-compatible with the 2025 model.
Audi S e-tron GT Bolt Pattern by Year
Looking for all generations? View the complete Audi S e-tron GT (2025–2026) Bolt Pattern & Generation Guide →
The table below shows how the S e-tron GT's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2025 | 5x112 | 66.5 | Not Applicable |
| 2026 | 5x112 | 66.5 | Not Applicable |
2025 Audi S e-tron GT Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2025 Audi S e-tron GT, donor rims must match the 5x112 PCD and have a center bore of at least 66.5 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.5mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 BMW 760i | 66.6 mm (Exact) | 25-35 | 14x1.25 (Cone) |
| 2019 BMW 8 Series | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2025 BMW 840i | 66.6 mm (Exact) | 25-35 | 14x1.25 (Cone) |
| 2025 BMW Alpina B8 | 66.6 mm (Exact) | 25-35 | 14x1.25 (Cone) |
| 2019 BMW i3 | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2025 BMW i4 | 66.6 mm (Exact) | 35-45 | 14x1.25 (Cone) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Audi S e-tron GT — Frequently Asked Questions
What is the bolt pattern for a 2025 Audi S e-tron GT?
The 2025 Audi S e-tron GT uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.5mm and the offset is Not Applicablemm.
What other years of Audi S e-tron GT have the same bolt pattern as the 2025?
The Audi S e-tron GT uses the 5x112 pattern from 2025 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Why is matching the 66.5mm center bore important for the 2025 S e-tron GT?
The 66.5mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 2025 Audi S e-tron GT?
The factory center bore (hub bore) for the 2025 Audi S e-tron GT is 66.5mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2025 Audi S e-tron GT?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2025 Audi S e-tron GT use?
The 2025 Audi S e-tron GT uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →