2025 BMW Alpina B8 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 BMW Alpina B8 is 5x112. It has a center bore of 66.6 mm, an offset range of 25-35, and utilizes 14x1.25 (Cone seat, 17mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2025 BMW Alpina B8 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.6 mm |
| Offset Range (ET) | 25-35 |
| Thread Size (Lug Nut / Bolt) | 14x1.25 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2025 Alpina B8 — Year-Specific Fitment Context
The 2025 BMW Alpina B8 is in year 2 of 3 using the 5x112 pattern (2024–2026). Wheels from any 2024–2026 BMW Alpina B8 are cross-compatible with the 2025 model.
BMW Alpina B8 Bolt Pattern by Year
Looking for all generations? View the complete BMW Alpina B8 (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the Alpina B8's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 BMW Alpina B8 Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2025 BMW Alpina B8, donor rims must match the 5x112 PCD and have a center bore of at least 66.6 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 BMW X6 | 66.6 mm (Exact) | 35-45 | 14x1.25 (Cone) |
| 2019 BMW X6 M | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2025 BMW X7 | 66.6 mm (Exact) | 35-45 | 14x1.25 (Cone) |
| 2025 BMW XM | 66.6 mm (Exact) | 35-45 | 14x1.25 (Cone) |
| 2019 BMW Z4 | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2025 McLaren 750S | 66.5 mm (Exact) | Front: +32mm, Rear: +40mm | 14x1.5 (Ball) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 BMW Alpina B8 — Frequently Asked Questions
What is the bolt pattern for a 2025 BMW Alpina B8?
The 2025 BMW Alpina B8 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 25-35mm.
What other years of BMW Alpina B8 have the same bolt pattern as the 2025?
The BMW Alpina B8 uses the 5x112 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What is the factory wheel offset for a 2025 BMW Alpina B8?
The OEM offset for the 2025 Alpina B8 is typically around 25-35mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2025 BMW Alpina B8?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 25-35mm, and a center bore of at least 66.6mm (using hub rings if larger).
Do 2025 BMW Alpina B8s use lug bolts or lug nuts?
The 2025 Alpina B8 requires 14x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I use spacers on my 2025 BMW Alpina B8?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 66.6mm center bore. Also verify that you have enough thread engagement for your 14x1.25 hardware.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →