2026 Mercedes-Benz GLC-Class Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Mercedes-Benz GLC-Class is 5x112. It has a center bore of 66.6 mm, an offset range of 38-45, and utilizes 14x1.5 (Ball seat, 17mm hex) fasteners tightened to 96 ft-lbs (130 Nm).
2026 Mercedes-Benz GLC-Class Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.6 mm |
| Offset Range (ET) | 38-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 96 ft-lbs (130 Nm) |
2026 GLC-Class — Year-Specific Fitment Context
The 2026 model year is the final year of the Mercedes-Benz GLC-Class's 5x112 bolt pattern run (since 2024). Wheels from any 2024–2026 Mercedes-Benz GLC-Class are cross-compatible with the 2026 model.
Mercedes-Benz GLC-Class Bolt Pattern by Year
Looking for all generations? View the complete Mercedes-Benz GLC-Class (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the GLC-Class's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Mercedes-Benz GLC-Class Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2026 Mercedes-Benz GLC-Class, donor rims must match the 5x112 PCD and have a center bore of at least 66.6 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Mercedes-Benz CLA | 66.6 mm (Exact) | 30-50 | 14x1.5 (Ball) |
| 2024 Mercedes-Benz CLA-Class | 66.6 mm (Exact) | 35-49 | 14x1.5 (Ball) |
| 2025 Mercedes-Benz CLE | 66.6 mm (Exact) | 35-45 | 14x1.5 (Ball) |
| 2022 Mercedes-Benz CLS | 66.6 mm (Exact) | 30-50 | 14x1.5 (Ball) |
| 2016 Mercedes-Benz CLS-Class | 66.6 mm (Exact) | 35 | B 14x1.50 (Ball) |
| 2017 Mercedes-Benz E-Class | 66.5 mm (Exact) | 49 | B 14x1.50 (Ball) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 96 ft-lbs (130 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Mercedes-Benz GLC-Class — Frequently Asked Questions
What is the bolt pattern for a 2026 Mercedes-Benz GLC-Class?
The 2026 Mercedes-Benz GLC-Class uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 38-45mm.
What other years of Mercedes-Benz GLC-Class have the same bolt pattern as the 2026?
The Mercedes-Benz GLC-Class uses the 5x112 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2026 Mercedes-Benz GLC-Class?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 2026 Mercedes-Benz GLC-Class?
The OEM offset for the 2026 GLC-Class is typically around 38-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2026 Mercedes-Benz GLC-Class?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 GLC-Class, the PCD is 5x112.
Why is matching the 66.6mm center bore important for the 2026 GLC-Class?
The 66.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →