2025 Mercedes-Benz GLE-Class Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Mercedes-Benz GLE-Class is 5x112. It has a center bore of 66.6 mm, an offset range of 40-50, and utilizes 14x1.5 (Ball seat, 17mm hex) fasteners tightened to 110 ft-lbs (150 Nm).
2025 Mercedes-Benz GLE-Class Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.6 mm |
| Offset Range (ET) | 40-50 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 110 ft-lbs (150 Nm) |
2025 GLE-Class — Year-Specific Fitment Context
The 2025 Mercedes-Benz GLE-Class is in year 2 of 3 using the 5x112 pattern (2024–2026). Wheels from any 2024–2026 Mercedes-Benz GLE-Class are cross-compatible with the 2025 model.
Mercedes-Benz GLE-Class Bolt Pattern by Year
Looking for all generations? View the complete Mercedes-Benz GLE-Class (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the GLE-Class's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Mercedes-Benz GLE-Class Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2025 Mercedes-Benz GLE-Class, donor rims must match the 5x112 PCD and have a center bore of at least 66.6 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2023 Audi RS e-tron GT | 66.6 mm (Exact) | 38 | B 14x1.50 (Ball) |
| 2025 Audi RS Q8 | 66.5 mm (Exact) | 25-35 | 14x1.5 (Ball) |
| 2025 Audi S e-tron GT | 66.5 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
| 2022 Audi S3 | 66.5 mm (Exact) | 30-45 | 14x1.5 (Ball) |
| 2010 Audi S4 | 66.6 mm (Exact) | 45 | B 14x1.50 (Ball) |
| 2022 Audi S5 | 66.5 mm (Exact) | 30-45 | 14x1.5 (Ball) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 110 ft-lbs (150 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Mercedes-Benz GLE-Class — Frequently Asked Questions
What is the bolt pattern for a 2025 Mercedes-Benz GLE-Class?
The 2025 Mercedes-Benz GLE-Class uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 40-50mm.
What other years of Mercedes-Benz GLE-Class have the same bolt pattern as the 2025?
The Mercedes-Benz GLE-Class uses the 5x112 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What is the center bore of a 2025 Mercedes-Benz GLE-Class?
The factory center bore (hub bore) for the 2025 Mercedes-Benz GLE-Class is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2025 Mercedes-Benz GLE-Class?
The OEM offset for the 2025 GLE-Class is typically around 40-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2025 Mercedes-Benz GLE-Class?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 66.6mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Do 2025 Mercedes-Benz GLE-Classs use lug bolts or lug nuts?
The 2025 GLE-Class requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →