2026 Mercedes-Benz GLS-Class Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Mercedes-Benz GLS-Class is 5x112. It has a center bore of 66.6 mm, an offset range of 35-45, and utilizes 14x1.5 (Ball seat, 17mm hex) fasteners tightened to 110 ft-lbs (150 Nm).
2026 Mercedes-Benz GLS-Class Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.6 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 110 ft-lbs (150 Nm) |
2026 GLS-Class — Year-Specific Fitment Context
The 2026 model year is the final year of the Mercedes-Benz GLS-Class's 5x112 bolt pattern run (since 2024). Wheels from any 2024–2026 Mercedes-Benz GLS-Class are cross-compatible with the 2026 model.
Mercedes-Benz GLS-Class Bolt Pattern by Year
Looking for all generations? View the complete Mercedes-Benz GLS-Class (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the GLS-Class's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Mercedes-Benz GLS-Class Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2026 Mercedes-Benz GLS-Class, donor rims must match the 5x112 PCD and have a center bore of at least 66.6 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2009 Audi A4 | 66.6 mm (Exact) | 45 | B 14x1.50 (Ball) |
| 2025 Audi A4 allroad | 66.5 mm (Exact) | 40-45 | 14x1.5 (Ball) |
| 2023 Audi A5 | 66.5 mm (Exact) | 30-45 | 14x1.5 (Ball) |
| 2017 Audi A5 Sport | 66.6 mm (Exact) | 29 | B 14x1.50 (Ball) |
| 2018 Audi A6 | 66.6 mm (Exact) | 30-45 | 14x1.5 (Ball) |
| 2025 Audi A6 allroad | 66.5 mm (Exact) | 35-45 | 14x1.5 (Ball) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 110 ft-lbs (150 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Mercedes-Benz GLS-Class — Frequently Asked Questions
What is the bolt pattern for a 2026 Mercedes-Benz GLS-Class?
The 2026 Mercedes-Benz GLS-Class uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 35-45mm.
What other years of Mercedes-Benz GLS-Class have the same bolt pattern as the 2026?
The Mercedes-Benz GLS-Class uses the 5x112 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What is the center bore of a 2026 Mercedes-Benz GLS-Class?
The factory center bore (hub bore) for the 2026 Mercedes-Benz GLS-Class is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another Mercedes-Benz fit my 2026 GLS-Class?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.6mm.
What is the factory wheel offset for a 2026 Mercedes-Benz GLS-Class?
The OEM offset for the 2026 GLS-Class is typically around 35-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2026 Mercedes-Benz GLS-Class?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 35-45mm, and a center bore of at least 66.6mm (using hub rings if larger).
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →