2016 Mercedes-Benz Metris Passenger Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 Mercedes-Benz Metris Passenger, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2016 Metris Passenger — Year-Specific Fitment Context
The 2016 model year marks the beginning of the Mercedes-Benz Metris Passenger's 5x112 bolt pattern era, which continued through 2022 (7 consecutive years). Wheels from any 2016–2022 Mercedes-Benz Metris Passenger are cross-compatible with the 2016 model.
Mercedes-Benz Metris Passenger Bolt Pattern by Year
The table below shows how the Metris Passenger's wheel specifications have changed over the years. The 2016 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2016 Mercedes-Benz Metris Passenger
For your 2016 Mercedes-Benz Metris Passenger, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels must be hub-centric; use hub-centric rings to avoid vibrations. The offset range is 30-50mm; staying within this ensures proper clearance and handling. Always use 14x1.5 lug nuts with the correct seat type—either cone or ball seat, depending on your wheel. Mismatched seats can cause wheel loosening. Verify lug nut torque to manufacturer specs and re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz Metris Passenger appears from 2016 to 2022 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 66.6mm without hub-centric rings to prevent vibration.
- ✅ Check that aftermarket wheels have sufficient brake caliper clearance, as the Metris has large brakes.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2016 Mercedes-Benz Metris Passenger — Frequently Asked Questions
What is the bolt pattern for a 2016 Mercedes-Benz Metris Passenger?
The 2016 Mercedes-Benz Metris Passenger uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.
What other years of Mercedes-Benz Metris Passenger have the same bolt pattern as the 2016?
The Mercedes-Benz Metris Passenger uses the 5x112 pattern from 2016 through 2022. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
What lug nut size does the 2016 Mercedes-Benz Metris Passenger use?
The 2016 Mercedes-Benz Metris Passenger uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2016 Mercedes-Benz?
The 2016 Metris Passenger uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2016 Mercedes-Benz Metris Passenger?
The factory center bore (hub bore) for the 2016 Mercedes-Benz Metris Passenger is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2016 Mercedes-Benz Metris Passenger?
The OEM offset for the 2016 Metris Passenger is typically around 30-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset