2021 Mercedes-Benz Metris Passenger Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2021 Mercedes-Benz Metris Passenger, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2021 Metris Passenger — Year-Specific Fitment Context
The 2021 Mercedes-Benz Metris Passenger is in year 6 of 7 using the 5x112 pattern (2016–2022). Wheels from any 2016–2022 Mercedes-Benz Metris Passenger are cross-compatible with the 2021 model.
Mercedes-Benz Metris Passenger Bolt Pattern by Year
The table below shows how the Metris Passenger's wheel specifications have changed over the years. The 2021 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2021 Mercedes-Benz Metris Passenger
For the 2021 Mercedes-Benz Metris Passenger, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels must use hub-centric rings to prevent vibration and ensure proper load distribution. The offset range of 30-50mm is sensitive; staying within this range avoids rubbing or suspension interference. Always verify lug nut thread pitch (14x1.5) and seat type—use ball-seat lug nuts for factory wheels or cone-seat for most aftermarket wheels. Incorrect lug nuts can cause wheel loosening. Cross-compatible wheels from 2016–2022 Metris models fit directly, but always confirm specifications.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz Metris Passenger appears from 2016 to 2022 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibrations and stress on wheel studs.
- ✅ Check inner clearance for brake calipers and suspension components when selecting offset near the extremes (30mm or 50mm).
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2021 Mercedes-Benz Metris Passenger — Frequently Asked Questions
What is the bolt pattern for a 2021 Mercedes-Benz Metris Passenger?
The 2021 Mercedes-Benz Metris Passenger uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.
What other years of Mercedes-Benz Metris Passenger have the same bolt pattern as the 2021?
The Mercedes-Benz Metris Passenger uses the 5x112 pattern from 2016 through 2022. Wheels from any of these model years are dimensionally compatible with the 2021, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2021 Mercedes-Benz Metris Passenger?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2021 Mercedes-Benz Metris Passenger?
The factory center bore (hub bore) for the 2021 Mercedes-Benz Metris Passenger is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2021 Mercedes-Benz Metris Passenger?
The OEM offset for the 2021 Metris Passenger is typically around 30-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 30-50mm offset mean for the 2021 Metris Passenger?
An offset of 30-50mm means the wheel's mounting surface is 30-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mercedes-Benz.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset