2020 Mercedes-Benz Sprinter 3500 XD Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Mercedes-Benz Sprinter 3500 XD Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2020 Sprinter 3500 XD Cargo — Year-Specific Fitment Context
The 2020 Mercedes-Benz Sprinter 3500 XD Cargo is in year 4 of 8 using the 5x112 pattern (2017–2024). Wheels from any 2017–2024 Mercedes-Benz Sprinter 3500 XD Cargo are cross-compatible with the 2020 model.
Mercedes-Benz Sprinter 3500 XD Cargo Bolt Pattern by Year
The table below shows how the Sprinter 3500 XD Cargo's wheel specifications have changed over the years. The 2020 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2020 Mercedes-Benz Sprinter 3500 XD Cargo
For your 2020 Mercedes-Benz Sprinter 3500 XD Cargo, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset must stay within 30-50mm; deviations can cause rubbing or suspension damage. Always use lug nuts with the correct 14x1.5 thread pitch and proper seat type (cone or ball) matching your wheels. Mismatched lug nuts can lead to wheel loss. Verify all specs before purchase.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz Sprinter 3500 XD Cargo appears from 2017 to 2024 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using steel wheels without verifying offset; many require spacers to clear brakes.
- ✅ Check that aftermarket wheels have a load rating sufficient for the Sprinter's GVWR.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Mercedes-Benz Sprinter 3500 XD Cargo — Frequently Asked Questions
What is the bolt pattern for a 2020 Mercedes-Benz Sprinter 3500 XD Cargo?
The 2020 Mercedes-Benz Sprinter 3500 XD Cargo uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.
What other years of Mercedes-Benz Sprinter 3500 XD Cargo have the same bolt pattern as the 2020?
The Mercedes-Benz Sprinter 3500 XD Cargo uses the 5x112 pattern from 2017 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2020 Mercedes-Benz?
The 2020 Sprinter 3500 XD Cargo uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2020 Mercedes-Benz Sprinter 3500 XD Cargo?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 30-50mm, and a center bore of at least 66.6mm (using hub rings if larger).
What is the PCD for a 2020 Mercedes-Benz Sprinter 3500 XD Cargo?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2020 Sprinter 3500 XD Cargo, the PCD is 5x112.
What is the factory wheel offset for a 2020 Mercedes-Benz Sprinter 3500 XD Cargo?
The OEM offset for the 2020 Sprinter 3500 XD Cargo is typically around 30-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset