2022 Mercedes-Benz Sprinter 3500 XD Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2022 Mercedes-Benz Sprinter 3500 XD Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2022 Sprinter 3500 XD Cargo — Year-Specific Fitment Context
The 2022 Mercedes-Benz Sprinter 3500 XD Cargo is in year 6 of 8 using the 5x112 pattern (2017–2024). Wheels from any 2017–2024 Mercedes-Benz Sprinter 3500 XD Cargo are cross-compatible with the 2022 model.
Mercedes-Benz Sprinter 3500 XD Cargo Bolt Pattern by Year
The table below shows how the Sprinter 3500 XD Cargo's wheel specifications have changed over the years. The 2022 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2022 Mercedes-Benz Sprinter 3500 XD Cargo
For the 2022 Mercedes-Benz Sprinter 3500 XD Cargo, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels must use hub-centric rings to prevent vibration and ensure load support. Offset must stay within 30-50mm; deviations risk rubbing or suspension damage. Always verify lug nut thread pitch (14x1.5) and seat type—factory uses ball seat, but aftermarket may require conical (60-degree) or ball seat lugs. Mismatched lug seats can cause wheel loosening. Cross-compatible with 2017–2024 Sprinter 3500 XD models.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz Sprinter 3500 XD Cargo appears from 2017 to 2024 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to account for settling.
- ✅ Avoid wheels with offset below 30mm; they may contact brake calipers or suspension arms.
- ✅ Use hub-centric rings made of aluminum or steel; plastic rings can deform under heavy loads.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2022 Mercedes-Benz Sprinter 3500 XD Cargo — Frequently Asked Questions
What is the bolt pattern for a 2022 Mercedes-Benz Sprinter 3500 XD Cargo?
The 2022 Mercedes-Benz Sprinter 3500 XD Cargo uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.
What other years of Mercedes-Benz Sprinter 3500 XD Cargo have the same bolt pattern as the 2022?
The Mercedes-Benz Sprinter 3500 XD Cargo uses the 5x112 pattern from 2017 through 2024. Wheels from any of these model years are dimensionally compatible with the 2022, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2022 Mercedes-Benz Sprinter 3500 XD Cargo?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2022 Mercedes-Benz Sprinter 3500 XD Cargo?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 30-50mm, and a center bore of at least 66.6mm (using hub rings if larger).
Do 2022 Mercedes-Benz Sprinter 3500 XD Cargos use lug bolts or lug nuts?
The 2022 Sprinter 3500 XD Cargo requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 2022 Mercedes-Benz Sprinter 3500 XD Cargo?
The OEM offset for the 2022 Sprinter 3500 XD Cargo is typically around 30-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset