2026 MINI Cooper Convertible Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 MINI Cooper Convertible is 5x112. It has a center bore of 66.6 mm, an offset range of 45-52, and utilizes 14x1.25 (Ball seat, 17mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2026 MINI Cooper Convertible Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.6 mm |
| Offset Range (ET) | 45-52 |
| Thread Size (Lug Nut / Bolt) | 14x1.25 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2026 Cooper Convertible — Year-Specific Fitment Context
The 2026 model year is the final year of the MINI Cooper Convertible's 5x112 bolt pattern run (since 2024). Wheels from any 2024–2026 MINI Cooper Convertible are cross-compatible with the 2026 model.
MINI Cooper Convertible Bolt Pattern by Year
Looking for all generations? View the complete MINI Cooper Convertible (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the Cooper Convertible's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 MINI Cooper Convertible Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2026 MINI Cooper Convertible, donor rims must match the 5x112 PCD and have a center bore of at least 66.6 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 BMW M240i | 66.6 mm (Exact) | 27-40 | 14x1.25 (Cone) |
| 2021 BMW M3 | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2025 BMW M340i | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2019 BMW M4 | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2025 BMW M440i | 66.6 mm (Exact) | 35-45 | 14x1.25 (Cone) |
| 2019 BMW M5 | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 MINI Cooper Convertible — Frequently Asked Questions
What is the bolt pattern for a 2026 MINI Cooper Convertible?
The 2026 MINI Cooper Convertible uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 45-52mm.
What other years of MINI Cooper Convertible have the same bolt pattern as the 2026?
The MINI Cooper Convertible uses the 5x112 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Why is matching the 66.6mm center bore important for the 2026 Cooper Convertible?
The 66.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 2026 MINI Cooper Convertible?
The factory center bore (hub bore) for the 2026 MINI Cooper Convertible is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2026 MINI Cooper Convertible?
The OEM offset for the 2026 Cooper Convertible is typically around 45-52mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2026 MINI Cooper Convertible?
Refer to your owner's manual for exact specs, but always tighten the 14x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →