2011 MINI Countryman Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 MINI Countryman, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.25 |
| Center Bore (CB) | 72.6 mm |
| Offset (ET) | 46 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2011 Countryman — Year-Specific Fitment Context
The 2011 model year marks the beginning of the MINI Countryman's 5x120 bolt pattern era, which continued through 2017 (7 consecutive years). Wheels from any 2011–2017 MINI Countryman are cross-compatible with the 2011 model. Across its full production run (2011–2025), the Countryman has also used: 5x112.
MINI Countryman Bolt Pattern by Year
The table below shows how the Countryman's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2011 | 5x120 | 72.6 | 46 |
| 2012 | 5x120 | 72.6 | 46 |
| 2013 | 5x120 | 72.6 | 46 |
| 2014 | 5x120 | 72.6 | 46 |
| 2015 | 5x120 | 72.6 | 46 |
| 2016 | 5x120 | 72.6 | 46 |
| 2017 | 5x120 | 72.6 | 46 |
| 2018 | 5x112 | 66.5 | 48 |
| 2019 | 5x112 | 66.5 | 48 |
| 2020 | 5x112 | 66.6 | 45 |
| 2021 | 5x112 | 66.6 | 45 |
| 2022 | 5x112 | 66.6 | 45 |
| 2023 | 5x112 | 66.6 | 45 |
| 2024 | 5x112 | 66.6 | 45 |
| 2025 | 5x112 | 66.6 | 45 |
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
Expert Buying Guide for 2011 MINI Countryman
For the 2011 MINI Countryman, the bolt pattern is 5x120 with a center bore of 72.6mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibrations. The factory offset is 46mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (14x1.25) and seat type—use conical (60-degree) or ball seat nuts as specified. Improper lug nuts can lead to wheel loosening. Wheels from 2011–2017 Countryman models are directly compatible. Avoid 5x112 wheels without adapters.
Historical Fitment Data Reference
In our dataset, MINI Countryman appears from 2011 to 2025 (15 model years). Across model years, this model appears with 2 bolt patterns (5x112, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 3.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Check inner clearance with aftermarket wheels; the strut and brake caliper are tight on this model.
- ✅ Use hub-centric rings if the aftermarket wheel center bore is larger than 72.6mm to avoid vibrations.
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 MINI Countryman — Frequently Asked Questions
What is the bolt pattern for a 2011 MINI Countryman?
The 2011 MINI Countryman uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 72.6mm and the offset is 46mm.
What other years of MINI Countryman have the same bolt pattern as the 2011?
The MINI Countryman uses the 5x120 pattern from 2011 through 2017. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What is the factory wheel offset for a 2011 MINI Countryman?
The OEM offset for the 2011 Countryman is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2011 MINI Countryman?
The factory center bore (hub bore) for the 2011 MINI Countryman is 72.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2011 MINI Countryman?
Yes, but ensure the wheel spacers match the 5x120 bolt pattern and 72.6mm center bore. Also verify that you have enough thread engagement for your B 14x1.25 hardware.
Do 2011 MINI Countrymans use lug bolts or lug nuts?
The 2011 Countryman requires B 14x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset