2019 Nissan NV1500 Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Nissan NV1500 Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 131.0 mm |
| Offset (ET) | 30 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2019 NV1500 Cargo — Year-Specific Fitment Context
The 2019 Nissan NV1500 Cargo is in year 8 of 10 using the 8x165.1 pattern (2012–2021). Wheels from any 2012–2021 Nissan NV1500 Cargo are cross-compatible with the 2019 model.
Nissan NV1500 Cargo Bolt Pattern by Year
The table below shows how the NV1500 Cargo's wheel specifications have changed over the years. The 2019 model year is highlighted.
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2019 Nissan NV1500 Cargo
The 2019 Nissan NV1500 Cargo uses an 8x165.1 bolt pattern with a 131.0mm center bore. When selecting aftermarket wheels, hub-centric rings are mandatory to prevent vibration and ensure proper load distribution. The factory offset is 30mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (14x1.5) and seat type—use conical (60-degree) or ball-seat nuts as specified. Never mix seat types. Re-torque after 50-100 miles. Wheels from 2012-2021 NV1500 models are cross-compatible.
Historical Fitment Data Reference
In our dataset, Nissan NV1500 Cargo appears from 2012 to 2021 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings (131.0mm to aftermarket bore) to avoid vibrations.
- ✅ Re-torque lug nuts to 98-108 ft-lb after 50-100 miles of driving.
- ✅ Check offset carefully; 30mm is standard, but wider wheels may need spacers or trimming.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Nissan NV1500 Cargo — Frequently Asked Questions
What is the bolt pattern for a 2019 Nissan NV1500 Cargo?
The 2019 Nissan NV1500 Cargo uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 131.0mm and the offset is 30mm.
What other years of Nissan NV1500 Cargo have the same bolt pattern as the 2019?
The Nissan NV1500 Cargo uses the 8x165.1 pattern from 2012 through 2021. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2019 Nissan NV1500 Cargo?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2019 Nissan?
The 2019 NV1500 Cargo uses a 8x165.1 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 2019 Nissan NV1500 Cargos use lug bolts or lug nuts?
The 2019 NV1500 Cargo requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 2019 Nissan NV1500 Cargo?
The OEM offset for the 2019 NV1500 Cargo is typically around 30mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset