1995 Nissan Pathfinder Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1995 Nissan Pathfinder, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 110.0 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1995 Pathfinder — Year-Specific Fitment Context
The 1995 Nissan Pathfinder is in year 4 of 15 using the 6x139.7 pattern (1992–2006). Wheels from any 1992–2006 Nissan Pathfinder are cross-compatible with the 1995 model. Across its full production run (1992–2024), the Pathfinder has also used: 5x114.3, 6x114.3.
Nissan Pathfinder Bolt Pattern by Year
The table below shows how the Pathfinder's wheel specifications have changed over the years. The 1995 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 6x139.7 | 100.1 | 30 |
| 1993 | 6x139.7 | 100.1 | 30 |
| 1994 | 6x139.7 | 110.0 | 40 |
| ▸ 1995 | 6x139.7 | 110.0 | 40 |
| 1996 | 6x139.7 | 110.0 | 40 |
| 1997 | 6x139.7 | 110.0 | 40 |
| 1998 | 6x139.7 | 110.0 | 40 |
| 1999 | 6x139.7 | 110.0 | 40 |
| 2000 | 6x139.7 | 110.0 | 40 |
| 2001 | 6x139.7 | 110.0 | 40 |
| 2002 | 6x139.7 | 110.0 | 40 |
| 2003 | 6x139.7 | 110.0 | 40 |
| 2004 | 6x139.7 | 110.0 | 40 |
| 2005 | 6x139.7 | 110.0 | 40 |
| 2006 | 6x139.7 | 110.0 | 40 |
| 2007 | 6x114.3 | 66.1 | 30 |
| 2008 | 6x114.3 | 66.1 | 30 |
| 2009 | 6x114.3 | 66.1 | 30 |
| 2010 | 6x114.3 | 66.1 | 30 |
| 2011 | 6x114.3 | 66.1 | 30 |
| 2012 | 6x114.3 | 66.1 | 30 |
| 2013 | 6x114.3 | 66.1 | 30 |
| 2014 | 5x114.3 | 66.1 | 50 |
| 2015 | 5x114.3 | 66.1 | 50 |
| 2016 | 5x114.3 | 66.1 | 50 |
| 2017 | 5x114.3 | 66.1 | 50 |
| 2018 | 5x114.3 | 66.1 | 50 |
| 2019 | 5x114.3 | 66.1 | 40 |
| 2020 | 5x114.3 | 66.1 | 40 |
| 2022 | 5x114.3 | 66.1 | 40 |
| 2023 | 5x114.3 | 66.1 | 40 |
| 2024 | 5x114.3 | 66.1 | 40 |
Fitment Notes
The 1995 Nissan Pathfinder has a bolt pattern of 6x139.7.
Imperial Conversion: This bolt pattern is commonly referred to as 6x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 6x5.5".
This means it is a 6 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Nissan Pathfinder appears from 1992 to 2024 (32 model years).
Across model years, this model appears with 3 bolt patterns (5x114.3, 6x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 20.0 mm
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
1995 Nissan Pathfinder — Frequently Asked Questions
What is the bolt pattern for a 1995 Nissan Pathfinder?
The 1995 Nissan Pathfinder uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 110.0mm and the offset is 40mm.
What other years of Nissan Pathfinder have the same bolt pattern as the 1995?
The Nissan Pathfinder uses the 6x139.7 pattern from 1992 through 2006. Wheels from any of these model years are dimensionally compatible with the 1995, provided the offset and center bore also match.
What is the factory wheel offset for a 1995 Nissan Pathfinder?
The OEM offset for the 1995 Pathfinder is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 1995 Nissan Pathfinder use?
The 1995 Nissan Pathfinder uses N 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 1995 Nissan Pathfinder?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 110.0mm center bore. Also verify that you have enough thread engagement for your N 12x1.25 hardware.
Why is matching the 110.0mm center bore important for the 1995 Pathfinder?
The 110.0mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Nissan Pathfinder has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 1992-2024 (32 model years).
- Observed bolt-pattern variants: 3 (5x114.3, 6x114.3, 6x139.7).
- Observed total offset span across years: 20.0 mm.
- Observed center-bore variants: 3 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1995 Nissan Pathfinder, please report it via our About page contact so we can verify and update this record.