2010 Nissan Pathfinder Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Nissan Pathfinder, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2010 Pathfinder — Year-Specific Fitment Context
The 2010 Nissan Pathfinder is in year 4 of 7 using the 6x114.3 pattern (2007–2013). Wheels from any 2007–2013 Nissan Pathfinder are cross-compatible with the 2010 model. Across its full production run (1992–2024), the Pathfinder has also used: 5x114.3, 6x139.7.
Nissan Pathfinder Bolt Pattern by Year
The table below shows how the Pathfinder's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 6x139.7 | 100.1 | 30 |
| 1993 | 6x139.7 | 100.1 | 30 |
| 1994 | 6x139.7 | 110.0 | 40 |
| 1995 | 6x139.7 | 110.0 | 40 |
| 1996 | 6x139.7 | 110.0 | 40 |
| 1997 | 6x139.7 | 110.0 | 40 |
| 1998 | 6x139.7 | 110.0 | 40 |
| 1999 | 6x139.7 | 110.0 | 40 |
| 2000 | 6x139.7 | 110.0 | 40 |
| 2001 | 6x139.7 | 110.0 | 40 |
| 2002 | 6x139.7 | 110.0 | 40 |
| 2003 | 6x139.7 | 110.0 | 40 |
| 2004 | 6x139.7 | 110.0 | 40 |
| 2005 | 6x139.7 | 110.0 | 40 |
| 2006 | 6x139.7 | 110.0 | 40 |
| 2007 | 6x114.3 | 66.1 | 30 |
| 2008 | 6x114.3 | 66.1 | 30 |
| 2009 | 6x114.3 | 66.1 | 30 |
| ▸ 2010 | 6x114.3 | 66.1 | 30 |
| 2011 | 6x114.3 | 66.1 | 30 |
| 2012 | 6x114.3 | 66.1 | 30 |
| 2013 | 6x114.3 | 66.1 | 30 |
| 2014 | 5x114.3 | 66.1 | 50 |
| 2015 | 5x114.3 | 66.1 | 50 |
| 2016 | 5x114.3 | 66.1 | 50 |
| 2017 | 5x114.3 | 66.1 | 50 |
| 2018 | 5x114.3 | 66.1 | 50 |
| 2019 | 5x114.3 | 66.1 | 40 |
| 2020 | 5x114.3 | 66.1 | 40 |
| 2022 | 5x114.3 | 66.1 | 40 |
| 2023 | 5x114.3 | 66.1 | 40 |
| 2024 | 5x114.3 | 66.1 | 40 |
6x114.3 Pattern Context
This bolt pattern appears on 138 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x114.3:
Expert Buying Guide for 2010 Nissan Pathfinder
For your 2010 Nissan Pathfinder, the 6x114.3 bolt pattern is shared with 2007–2013 models. The 66.1mm center bore is critical; aftermarket wheels with larger bores require hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset is sensitive—stick close to 30mm to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.25) and seat type (cone or ball, matching your wheels). Improper seating can cause wheel loss. Re-torque after 50–100 miles.
Historical Fitment Data Reference
In our dataset, Nissan Pathfinder appears from 1992 to 2024 (32 model years). Across model years, this model appears with 3 bolt patterns (5x114.3, 6x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 20.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85–95 ft-lb after 50–100 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 66.1mm.
- ✅ Avoid wheels from pre-2007 Pathfinders (5x114.3) or post-2013 (6x139.7) without adapters.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Nissan Pathfinder — Frequently Asked Questions
What is the bolt pattern for a 2010 Nissan Pathfinder?
The 2010 Nissan Pathfinder uses a 6x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 30mm.
What other years of Nissan Pathfinder have the same bolt pattern as the 2010?
The Nissan Pathfinder uses the 6x114.3 pattern from 2007 through 2013. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
Why is matching the 66.1mm center bore important for the 2010 Pathfinder?
The 66.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2010 Nissan Pathfinder?
The OEM offset for the 2010 Pathfinder is typically around 30mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2010 Nissan?
The 2010 Pathfinder uses a 6x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 2010 Nissan Pathfinder?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 Pathfinder, the PCD is 6x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset