2000 Dodge Dakota Quad Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Dodge Dakota Quad Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x114.3 |
|---|---|
| Lug Nut / Bolt Size | 1/2 20 |
| Center Bore (CB) | 71.5 mm |
| Offset (ET) | 30 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2000 Dakota Quad Cab — Year-Specific Fitment Context
The 2000 model year marks the beginning of the Dodge Dakota Quad Cab's 6x114.3 bolt pattern era, which continued through 2004 (5 consecutive years). Wheels from any 2000–2004 Dodge Dakota Quad Cab are cross-compatible with the 2000 model. Across its full production run (2000–2007), the Dakota Quad Cab has also used: 5x139.7.
Dodge Dakota Quad Cab Bolt Pattern by Year
The table below shows how the Dakota Quad Cab's wheel specifications have changed over the years. The 2000 model year is highlighted.
6x114.3 Pattern Context
This bolt pattern appears on 138 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x114.3:
Expert Buying Guide for 2000 Dodge Dakota Quad Cab
For your 2000 Dodge Dakota Quad Cab, the bolt pattern is 6x114.3mm with a center bore of 71.5mm. Aftermarket wheels often have a larger bore, so hub-centric rings (71.5mm to wheel bore) are essential to prevent vibrations and ensure proper load distribution. The factory offset is 30mm; deviations beyond ±10mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (1/2-20) and seat type—factory wheels use a cone seat. Using incorrect lug nuts can lead to wheel detachment. Verify that aftermarket wheels are hub-centric or use rings, and check offset carefully.
Historical Fitment Data Reference
In our dataset, Dodge Dakota Quad Cab appears from 2000 to 2007 (8 model years). Across model years, this model appears with 2 bolt patterns (5x139.7, 6x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 4.6 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 95-105 ft-lbs after 50-100 miles of driving.
- ✅ Avoid wheels with a center bore larger than 71.5mm without hub-centric rings.
- ✅ Check that aftermarket wheels clear the brake calipers and suspension components.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Dodge Dakota Quad Cab — Frequently Asked Questions
What is the bolt pattern for a 2000 Dodge Dakota Quad Cab?
The 2000 Dodge Dakota Quad Cab uses a 6x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.5mm and the offset is 30mm.
What other years of Dodge Dakota Quad Cab have the same bolt pattern as the 2000?
The Dodge Dakota Quad Cab uses the 6x114.3 pattern from 2000 through 2004. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2000 Dodge Dakota Quad Cab?
Absolutely. Just ensure the aftermarket wheels have a 6x114.3 bolt pattern, an offset near 30mm, and a center bore of at least 71.5mm (using hub rings if larger).
Why is matching the 71.5mm center bore important for the 2000 Dakota Quad Cab?
The 71.5mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Will wheels from another Dodge fit my 2000 Dakota Quad Cab?
Only if they share the exact same 6x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 71.5mm.
What is the factory wheel offset for a 2000 Dodge Dakota Quad Cab?
The OEM offset for the 2000 Dakota Quad Cab is typically around 30mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset