2006 Dodge Dakota Quad Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Dodge Dakota Quad Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 |
| Center Bore (CB) | 77.8 mm |
| Offset (ET) | 25.4 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 5x139.7 is commonly referred to as 5x5.5" in US Standard.
2006 Dakota Quad Cab — Year-Specific Fitment Context
The 2006 Dodge Dakota Quad Cab is in year 2 of 3 using the 5x139.7 pattern (2005–2007). Wheels from any 2005–2007 Dodge Dakota Quad Cab are cross-compatible with the 2006 model. Across its full production run (2000–2007), the Dakota Quad Cab has also used: 6x114.3.
Dodge Dakota Quad Cab Bolt Pattern by Year
The table below shows how the Dakota Quad Cab's wheel specifications have changed over the years. The 2006 model year is highlighted.
5x139.7 Pattern Context
This bolt pattern appears on 261 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x139.7:
Expert Buying Guide for 2006 Dodge Dakota Quad Cab
For your 2006 Dodge Dakota Quad Cab, the 5x139.7 bolt pattern is shared with 2005–2007 models. The 77.8mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive; the factory 25.4mm offset should be maintained within ±5mm to avoid rubbing or bearing stress. Always use 9/16" lug nuts with the correct thread pitch (likely 9/16-18) and a cone seat (60-degree) or ball seat as per the wheel manufacturer. Never use improper seat types, as this can cause wheel loosening. Re-torque after 50–100 miles.
Historical Fitment Data Reference
In our dataset, Dodge Dakota Quad Cab appears from 2000 to 2007 (8 model years). Across model years, this model appears with 2 bolt patterns (5x139.7, 6x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 4.6 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 95–105 ft-lbs after 50–100 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 77.8mm; otherwise, vibrations may occur.
- ✅ Avoid wheels with offset below 20mm or above 30mm to prevent clearance issues with brakes and suspension.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 Dodge Dakota Quad Cab — Frequently Asked Questions
What is the bolt pattern for a 2006 Dodge Dakota Quad Cab?
The 2006 Dodge Dakota Quad Cab uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 77.8mm and the offset is 25.4mm.
What other years of Dodge Dakota Quad Cab have the same bolt pattern as the 2006?
The Dodge Dakota Quad Cab uses the 5x139.7 pattern from 2005 through 2007. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
Will wheels from another Dodge fit my 2006 Dakota Quad Cab?
Only if they share the exact same 5x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 77.8mm.
How tight should I torque the lug nuts on a 2006 Dodge Dakota Quad Cab?
Refer to your owner's manual for exact specs, but always tighten the 9/16 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 77.8mm center bore important for the 2006 Dakota Quad Cab?
The 77.8mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What lug nut size does the 2006 Dodge Dakota Quad Cab use?
The 2006 Dodge Dakota Quad Cab uses 9/16 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset