2001 Dodge Dakota Quad Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Dodge Dakota Quad Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x114.3 |
|---|---|
| Lug Nut / Bolt Size | 1/2 20 |
| Center Bore (CB) | 71.5 mm |
| Offset (ET) | 30 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2001 Dakota Quad Cab — Year-Specific Fitment Context
The 2001 Dodge Dakota Quad Cab is in year 2 of 5 using the 6x114.3 pattern (2000–2004). Wheels from any 2000–2004 Dodge Dakota Quad Cab are cross-compatible with the 2001 model. Across its full production run (2000–2007), the Dakota Quad Cab has also used: 5x139.7.
Dodge Dakota Quad Cab Bolt Pattern by Year
The table below shows how the Dakota Quad Cab's wheel specifications have changed over the years. The 2001 model year is highlighted.
Fitment Notes
The 2001 Dodge Dakota Quad Cab has a bolt pattern of 6x114.3.
This means it is a 6 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Dodge Dakota Quad Cab appears from 2000 to 2007 (8 model years).
Across model years, this model appears with 2 bolt patterns (5x139.7, 6x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 4.6 mm
6x114.3 Pattern Context
This bolt pattern appears on 138 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x114.3:
2001 Dodge Dakota Quad Cab — Frequently Asked Questions
What is the bolt pattern for a 2001 Dodge Dakota Quad Cab?
The 2001 Dodge Dakota Quad Cab uses a 6x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.5mm and the offset is 30mm.
What other years of Dodge Dakota Quad Cab have the same bolt pattern as the 2001?
The Dodge Dakota Quad Cab uses the 6x114.3 pattern from 2000 through 2004. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
What lug nut size does the 2001 Dodge Dakota Quad Cab use?
The 2001 Dodge Dakota Quad Cab uses 1/2 20 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What does 30mm offset mean for the 2001 Dakota Quad Cab?
An offset of 30mm means the wheel's mounting surface is 30mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Dodge.
What is the factory wheel offset for a 2001 Dodge Dakota Quad Cab?
The OEM offset for the 2001 Dakota Quad Cab is typically around 30mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2001 Dodge Dakota Quad Cab?
Refer to your owner's manual for exact specs, but always tighten the 1/2 20 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Fitment Checklist Before You Buy Wheels
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Dodge Dakota Quad Cab has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 2000-2007 (8 model years).
- Observed bolt-pattern variants: 2 (5x139.7, 6x114.3).
- Observed total offset span across years: 4.6 mm.
- Observed center-bore variants: 2 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2001 Dodge Dakota Quad Cab, please report it via our About page contact so we can verify and update this record.