2005 Dodge Dakota Quad Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2005 Dodge Dakota Quad Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 |
| Center Bore (CB) | 77.8 mm |
| Offset (ET) | 25.4 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 5x139.7 is commonly referred to as 5x5.5" in US Standard.
2005 Dakota Quad Cab — Year-Specific Fitment Context
The 2005 model year marks the beginning of the Dodge Dakota Quad Cab's 5x139.7 bolt pattern era, which continued through 2007 (3 consecutive years). Wheels from any 2005–2007 Dodge Dakota Quad Cab are cross-compatible with the 2005 model. Note: the 2004 model used a different pattern (6x114.3), so its wheels are NOT interchangeable with the 2005. Across its full production run (2000–2007), the Dakota Quad Cab has also used: 6x114.3.
Dodge Dakota Quad Cab Bolt Pattern by Year
The table below shows how the Dakota Quad Cab's wheel specifications have changed over the years. The 2005 model year is highlighted.
5x139.7 Pattern Context
This bolt pattern appears on 261 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x139.7:
Expert Buying Guide for 2005 Dodge Dakota Quad Cab
For the 2005 Dodge Dakota Quad Cab, the bolt pattern is 5x139.7mm with a center bore of 77.8mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 25.4mm; deviations can affect suspension geometry and tire clearance. Always verify lug nut thread pitch (9/16-18) and seat type (cone or ball) to avoid wheel loosening. Wheels from 2005–2007 Dakota Quad Cabs are direct fit; 2004 models with 6x114.3 are incompatible. Safety first: improper fitment can lead to wheel separation.
Historical Fitment Data Reference
In our dataset, Dodge Dakota Quad Cab appears from 2000 to 2007 (8 model years). Across model years, this model appears with 2 bolt patterns (5x139.7, 6x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 4.6 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using wheels with a center bore larger than 77.8mm without hub-centric rings; they are critical for this vehicle.
- ✅ Check offset carefully: a 25.4mm offset is standard; going too low (negative offset) may cause rubbing on suspension components.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2005 Dodge Dakota Quad Cab — Frequently Asked Questions
What is the bolt pattern for a 2005 Dodge Dakota Quad Cab?
The 2005 Dodge Dakota Quad Cab uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 77.8mm and the offset is 25.4mm.
What other years of Dodge Dakota Quad Cab have the same bolt pattern as the 2005?
The Dodge Dakota Quad Cab uses the 5x139.7 pattern from 2005 through 2007. Wheels from any of these model years are dimensionally compatible with the 2005, provided the offset and center bore also match.
Can I use 2004 Dodge Dakota Quad Cab wheels on a 2005?
No. The 2004 Dakota Quad Cab used a 6x114.3 bolt pattern, which differs from the 2005's 5x139.7. They are not interchangeable.
Can I use spacers on my 2005 Dodge Dakota Quad Cab?
Yes, but ensure the wheel spacers match the 5x139.7 bolt pattern and 77.8mm center bore. Also verify that you have enough thread engagement for your 9/16 hardware.
What is the PCD for a 2005 Dodge Dakota Quad Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2005 Dakota Quad Cab, the PCD is 5x139.7.
What is the center bore of a 2005 Dodge Dakota Quad Cab?
The factory center bore (hub bore) for the 2005 Dodge Dakota Quad Cab is 77.8mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset