1997 Nissan Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 Nissan Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | M12x1.25 |
| Center Bore (CB) | 100.0 mm |
| Offset (ET) | 10-25mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
1997 Regular Cab — Year-Specific Fitment Context
The 1997 model year is the final year of the Nissan Regular Cab's 6x139.7 bolt pattern run (since 1992). Wheels from any 1992–1997 Nissan Regular Cab are cross-compatible with the 1997 model.
Nissan Regular Cab Bolt Pattern by Year
The table below shows how the Regular Cab's wheel specifications have changed over the years. The 1997 model year is highlighted.
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 1997 Nissan Regular Cab
For your 1997 Nissan Regular Cab, the 6x139.7 bolt pattern is shared with 1992–1997 models. The 100.0mm center bore is critical: aftermarket wheels often have a larger bore (e.g., 108mm), requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset range is 10–25mm; staying within this avoids rubbing on suspension or fenders. Always use M12x1.25 lug nuts with the correct seat (conical 60° or ball seat, depending on wheel). Improper thread pitch or seating can cause wheel loss. Verify wheel bore and offset before purchase.
Historical Fitment Data Reference
In our dataset, Nissan Regular Cab appears from 1992 to 1997 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 35.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to ensure proper seating.
- ✅ Avoid using universal lug nuts; they may not seat correctly with your wheels.
- ✅ Check for clearance with aftermarket wheels: 10mm offset may require trimming fender liners on lowered trucks.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1997 Nissan Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 1997 Nissan Regular Cab?
The 1997 Nissan Regular Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 100.0mm and the offset is 10-25mmmm.
What other years of Nissan Regular Cab have the same bolt pattern as the 1997?
The Nissan Regular Cab uses the 6x139.7 pattern from 1992 through 1997. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.
Why is matching the 100.0mm center bore important for the 1997 Regular Cab?
The 100.0mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Do 1997 Nissan Regular Cabs use lug bolts or lug nuts?
The 1997 Regular Cab requires M12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 1997 Nissan Regular Cab?
The OEM offset for the 1997 Regular Cab is typically around 10-25mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 1997 Nissan Regular Cab?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 100.0mm center bore. Also verify that you have enough thread engagement for your M12x1.25 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset