2017 Nissan TITAN Single Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Nissan TITAN Single Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 77.8 mm |
| Offset (ET) | 25 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2017 TITAN Single Cab — Year-Specific Fitment Context
The 2017 model year marks the beginning of the Nissan TITAN Single Cab's 6x139.7 bolt pattern era, which continued through 2019 (3 consecutive years). Wheels from any 2017–2019 Nissan TITAN Single Cab are cross-compatible with the 2017 model.
Nissan TITAN Single Cab Bolt Pattern by Year
The table below shows how the TITAN Single Cab's wheel specifications have changed over the years. The 2017 model year is highlighted.
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2017 Nissan TITAN Single Cab
For the 2017 Nissan TITAN Single Cab, the bolt pattern is 6x139.7mm with a center bore of 77.8mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 25mm; deviations beyond ±10mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.25) and seat type (conical/60-degree taper). Using incorrect lug nuts can lead to wheel detachment. Verify wheel load rating meets or exceeds OEM specifications for safety.
Historical Fitment Data Reference
In our dataset, Nissan TITAN Single Cab appears from 2017 to 2019 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain proper clamping force.
- ✅ Avoid wheels with a center bore larger than 77.8mm without hub-centric rings to prevent vibration.
- ✅ Check for brake caliper clearance when using wheels with offset less than 15mm or greater than 35mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 Nissan TITAN Single Cab — Frequently Asked Questions
What is the bolt pattern for a 2017 Nissan TITAN Single Cab?
The 2017 Nissan TITAN Single Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 77.8mm and the offset is 25mm.
What other years of Nissan TITAN Single Cab have the same bolt pattern as the 2017?
The Nissan TITAN Single Cab uses the 6x139.7 pattern from 2017 through 2019. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
Why is matching the 77.8mm center bore important for the 2017 TITAN Single Cab?
The 77.8mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Will wheels from another Nissan fit my 2017 TITAN Single Cab?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 77.8mm.
Can I use spacers on my 2017 Nissan TITAN Single Cab?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 77.8mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
Do 2017 Nissan TITAN Single Cabs use lug bolts or lug nuts?
The 2017 TITAN Single Cab requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset