1996 Plymouth Breeze Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1996 Plymouth Breeze, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1996 Breeze — Year-Specific Fitment Context
The 1996 model year marks the beginning of the Plymouth Breeze's 5x100 bolt pattern era, which continued through 2000 (5 consecutive years). Wheels from any 1996–2000 Plymouth Breeze are cross-compatible with the 1996 model.
Plymouth Breeze Bolt Pattern by Year
The table below shows how the Breeze's wheel specifications have changed over the years. The 1996 model year is highlighted.
Fitment Notes
The 1996 Plymouth Breeze has a bolt pattern of 5x100.
This means it is a 5 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Plymouth Breeze appears from 1996 to 2000 (5 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
1996 Plymouth Breeze — Frequently Asked Questions
What is the bolt pattern for a 1996 Plymouth Breeze?
The 1996 Plymouth Breeze uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 40mm.
What other years of Plymouth Breeze have the same bolt pattern as the 1996?
The Plymouth Breeze uses the 5x100 pattern from 1996 through 2000. Wheels from any of these model years are dimensionally compatible with the 1996, provided the offset and center bore also match.
What is the center bore of a 1996 Plymouth Breeze?
The factory center bore (hub bore) for the 1996 Plymouth Breeze is 57.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 1996 Plymouth Breeze?
Yes, but ensure the wheel spacers match the 5x100 bolt pattern and 57.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
How tight should I torque the lug nuts on a 1996 Plymouth Breeze?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 40mm offset mean for the 1996 Breeze?
An offset of 40mm means the wheel's mounting surface is 40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Plymouth.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Plymouth Breeze is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1996-2000 (5 model years).
- Observed bolt-pattern variants: 1 (5x100).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1996 Plymouth Breeze, please report it via our About page contact so we can verify and update this record.