1999 Plymouth Breeze Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1999 Plymouth Breeze, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1999 Breeze — Year-Specific Fitment Context
The 1999 Plymouth Breeze is in year 4 of 5 using the 5x100 pattern (1996–2000). Wheels from any 1996–2000 Plymouth Breeze are cross-compatible with the 1999 model.
Plymouth Breeze Bolt Pattern by Year
The table below shows how the Breeze's wheel specifications have changed over the years. The 1999 model year is highlighted.
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 1999 Plymouth Breeze
For your 1999 Plymouth Breeze, the 5x100 bolt pattern and 57.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 40mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use the correct 12x1.5 lug nuts with the proper seat type (cone or ball) matching your wheels. Improper lug nuts can lead to wheel separation. Verify all specifications before purchase.
Historical Fitment Data Reference
In our dataset, Plymouth Breeze appears from 1996 to 2000 (5 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Check for clearance between the wheel spokes and brake calipers, especially with aftermarket wheels.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on studs.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1999 Plymouth Breeze — Frequently Asked Questions
What is the bolt pattern for a 1999 Plymouth Breeze?
The 1999 Plymouth Breeze uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 40mm.
What other years of Plymouth Breeze have the same bolt pattern as the 1999?
The Plymouth Breeze uses the 5x100 pattern from 1996 through 2000. Wheels from any of these model years are dimensionally compatible with the 1999, provided the offset and center bore also match.
What lug nut size does the 1999 Plymouth Breeze use?
The 1999 Plymouth Breeze uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 1999 Plymouth Breeze?
The OEM offset for the 1999 Breeze is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 1999 Plymouth Breeze?
Absolutely. Just ensure the aftermarket wheels have a 5x100 bolt pattern, an offset near 40mm, and a center bore of at least 57.1mm (using hub rings if larger).
Will wheels from another Plymouth fit my 1999 Breeze?
Only if they share the exact same 5x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 57.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset