1997 Plymouth Neon Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 Plymouth Neon, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1997 Neon — Year-Specific Fitment Context
The 1997 Plymouth Neon is in year 3 of 7 using the 5x100 pattern (1995–2001). Wheels from any 1995–2001 Plymouth Neon are cross-compatible with the 1997 model.
Plymouth Neon Bolt Pattern by Year
The table below shows how the Neon's wheel specifications have changed over the years. The 1997 model year is highlighted.
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 1997 Plymouth Neon
For your 1997 Plymouth Neon, the 5x100 bolt pattern and 57.1mm center bore are critical. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 40mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct 12x1.5 thread pitch and a 60-degree conical seat—using the wrong seat type can lead to wheel loosening. Re-torque after 50-100 miles. Avoid wheels with offset below 35mm (too aggressive) or above 45mm (too tucked).
Historical Fitment Data Reference
In our dataset, Plymouth Neon appears from 1995 to 2001 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-100 ft-lbs after 50-100 miles of driving.
- ✅ Check for caliper clearance when using wheels with offset below 35mm.
- ✅ Use hub-centric rings if aftermarket wheel bore exceeds 57.1mm to prevent vibration.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1997 Plymouth Neon — Frequently Asked Questions
What is the bolt pattern for a 1997 Plymouth Neon?
The 1997 Plymouth Neon uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 40mm.
What other years of Plymouth Neon have the same bolt pattern as the 1997?
The Plymouth Neon uses the 5x100 pattern from 1995 through 2001. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.
What lug nut size does the 1997 Plymouth Neon use?
The 1997 Plymouth Neon uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Why is matching the 57.1mm center bore important for the 1997 Neon?
The 57.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the PCD for a 1997 Plymouth Neon?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1997 Neon, the PCD is 5x100.
How tight should I torque the lug nuts on a 1997 Plymouth Neon?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset