1998 Plymouth Neon Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1998 Plymouth Neon, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1998 Neon — Year-Specific Fitment Context
The 1998 Plymouth Neon is in year 4 of 7 using the 5x100 pattern (1995–2001). Wheels from any 1995–2001 Plymouth Neon are cross-compatible with the 1998 model.
Plymouth Neon Bolt Pattern by Year
The table below shows how the Neon's wheel specifications have changed over the years. The 1998 model year is highlighted.
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 1998 Plymouth Neon
For your 1998 Plymouth Neon, the bolt pattern is 5x100 with a 57.1mm center bore. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 40mm; staying within ±5mm is recommended to avoid rubbing or clearance issues. Always verify lug nut thread pitch (12x1.5) and seat type—use conical (60-degree) or ball seat lugs as required by the wheel. Never mix seat types; improper seating can cause wheel loss. Re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Plymouth Neon appears from 1995 to 2001 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-100 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels with a larger center bore, install hub-centric rings to match the 57.1mm hub.
- ✅ Avoid wheels with offset below 35mm or above 45mm to prevent rubbing on suspension or bodywork.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1998 Plymouth Neon — Frequently Asked Questions
What is the bolt pattern for a 1998 Plymouth Neon?
The 1998 Plymouth Neon uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 40mm.
What other years of Plymouth Neon have the same bolt pattern as the 1998?
The Plymouth Neon uses the 5x100 pattern from 1995 through 2001. Wheels from any of these model years are dimensionally compatible with the 1998, provided the offset and center bore also match.
What does 40mm offset mean for the 1998 Neon?
An offset of 40mm means the wheel's mounting surface is 40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Plymouth.
How do I measure the bolt pattern on my 1998 Plymouth?
The 1998 Neon uses a 5x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 1998 Plymouth Neons use lug bolts or lug nuts?
The 1998 Neon requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 1998 Plymouth Neon?
Absolutely. Just ensure the aftermarket wheels have a 5x100 bolt pattern, an offset near 40mm, and a center bore of at least 57.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset