1993 Plymouth Voyager Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 Plymouth Voyager, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 71.5 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1993 Voyager — Year-Specific Fitment Context
The 1993 Plymouth Voyager is in year 2 of 9 using the 5x114.3 pattern (1992–2000). Wheels from any 1992–2000 Plymouth Voyager are cross-compatible with the 1993 model.
Plymouth Voyager Bolt Pattern by Year
The table below shows how the Voyager's wheel specifications have changed over the years. The 1993 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1993 Plymouth Voyager
When selecting wheels for your 1993 Plymouth Voyager, the 5x114.3 bolt pattern is shared with 1992–2000 models, ensuring cross-compatibility. The critical center bore is 71.5mm; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset is sensitive: the factory spec is 40mm. Deviating more than ±5mm can cause rubbing on suspension or bodywork, or negatively impact handling. Always verify lug nut compatibility: the thread pitch is 12x1.5, and the seat type must match—factory uses conical (60-degree) seats. Using incorrect lug nuts can lead to wheel loosening. For safety, avoid ball-seat lug nuts unless the wheel is designed for them.
Historical Fitment Data Reference
In our dataset, Plymouth Voyager appears from 1992 to 2000 (9 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to ensure proper seating.
- ✅ When installing aftermarket wheels, always use hub-centric rings to match the 71.5mm center bore.
- ✅ Check offset carefully: staying within 35–45mm is recommended to avoid clearance issues with brake calipers and suspension components.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1993 Plymouth Voyager — Frequently Asked Questions
What is the bolt pattern for a 1993 Plymouth Voyager?
The 1993 Plymouth Voyager uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.5mm and the offset is 40mm.
What other years of Plymouth Voyager have the same bolt pattern as the 1993?
The Plymouth Voyager uses the 5x114.3 pattern from 1992 through 2000. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.
Will wheels from another Plymouth fit my 1993 Voyager?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 71.5mm.
How tight should I torque the lug nuts on a 1993 Plymouth Voyager?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 1993 Plymouth?
The 1993 Voyager uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 1993 Plymouth Voyager?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1993 Voyager, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset