2007 Pontiac G6 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Pontiac G6, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x110 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 65.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2007 G6 — Year-Specific Fitment Context
The 2007 Pontiac G6 is in year 3 of 6 using the 5x110 pattern (2005–2010). Wheels from any 2005–2010 Pontiac G6 are cross-compatible with the 2007 model.
Pontiac G6 Bolt Pattern by Year
The table below shows how the G6's wheel specifications have changed over the years. The 2007 model year is highlighted.
5x110 Pattern Context
This bolt pattern appears on 126 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x110:
Expert Buying Guide for 2007 Pontiac G6
When selecting wheels for your 2007 Pontiac G6, the 5x110 bolt pattern and 65.1mm center bore are critical. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 40mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut compatibility: the G6 uses M12x1.50 thread pitch with a conical (60-degree) seat. Using incorrect lug nuts can lead to wheel loosening. For safety, re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Pontiac G6 appears from 2005 to 2010 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 65.1mm to avoid vibration.
- ✅ Stick to offsets between 35mm and 45mm to maintain proper clearance and avoid rubbing on suspension or fenders.
- ✅ Re-torque lug nuts to 100 ft-lbs after 50 miles of driving to ensure proper seating.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Pontiac G6 — Frequently Asked Questions
What is the bolt pattern for a 2007 Pontiac G6?
The 2007 Pontiac G6 uses a 5x110 bolt pattern (also called lug pattern or PCD). The center bore is 65.1mm and the offset is 40mm.
What other years of Pontiac G6 have the same bolt pattern as the 2007?
The Pontiac G6 uses the 5x110 pattern from 2005 through 2010. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
What is the factory wheel offset for a 2007 Pontiac G6?
The OEM offset for the 2007 G6 is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2007 Pontiac?
The 2007 G6 uses a 5x110 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2007 Pontiac G6?
Absolutely. Just ensure the aftermarket wheels have a 5x110 bolt pattern, an offset near 40mm, and a center bore of at least 65.1mm (using hub rings if larger).
How tight should I torque the lug nuts on a 2007 Pontiac G6?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset