2006 Pontiac G6 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Pontiac G6, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x110 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 65.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2006 G6 — Year-Specific Fitment Context
The 2006 Pontiac G6 is in year 2 of 6 using the 5x110 pattern (2005–2010). Wheels from any 2005–2010 Pontiac G6 are cross-compatible with the 2006 model.
Pontiac G6 Bolt Pattern by Year
The table below shows how the G6's wheel specifications have changed over the years. The 2006 model year is highlighted.
5x110 Pattern Context
This bolt pattern appears on 126 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x110:
Expert Buying Guide for 2006 Pontiac G6
For your 2006 Pontiac G6, the 5x110 bolt pattern and 65.1mm center bore are critical. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 40mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (12x1.50) and seat type—factory uses conical (60-degree) seats. Using incorrect lug nuts can lead to wheel detachment. For aftermarket wheels, ensure they are hub-centric or use rings, and check offset carefully.
Historical Fitment Data Reference
In our dataset, Pontiac G6 appears from 2005 to 2010 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 65.1mm bore is specific and mismatched bores cause vibrations.
- ✅ When lowering the vehicle, offset sensitivity increases; a 40mm offset may need adjustment to prevent tire rub on fenders or suspension.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 Pontiac G6 — Frequently Asked Questions
What is the bolt pattern for a 2006 Pontiac G6?
The 2006 Pontiac G6 uses a 5x110 bolt pattern (also called lug pattern or PCD). The center bore is 65.1mm and the offset is 40mm.
What other years of Pontiac G6 have the same bolt pattern as the 2006?
The Pontiac G6 uses the 5x110 pattern from 2005 through 2010. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
What is the center bore of a 2006 Pontiac G6?
The factory center bore (hub bore) for the 2006 Pontiac G6 is 65.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2006 Pontiac G6?
The OEM offset for the 2006 G6 is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 2006 Pontiac G6 use?
The 2006 Pontiac G6 uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 2006 Pontiac G6?
Absolutely. Just ensure the aftermarket wheels have a 5x110 bolt pattern, an offset near 40mm, and a center bore of at least 65.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset