2004 Pontiac Vibe Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2004 Pontiac Vibe, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 54.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2004 Vibe — Year-Specific Fitment Context
The 2004 Pontiac Vibe is in year 2 of 5 using the 5x100 pattern (2003–2007). Wheels from any 2003–2007 Pontiac Vibe are cross-compatible with the 2004 model. Across its full production run (2003–2010), the Vibe has also used: 5x114.3.
Pontiac Vibe Bolt Pattern by Year
The table below shows how the Vibe's wheel specifications have changed over the years. The 2004 model year is highlighted.
Fitment Notes
The 2004 Pontiac Vibe has a bolt pattern of 5x100.
This means it is a 5 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Pontiac Vibe appears from 2003 to 2010 (8 model years).
Across model years, this model appears with 2 bolt patterns (5x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
2004 Pontiac Vibe — Frequently Asked Questions
What is the bolt pattern for a 2004 Pontiac Vibe?
The 2004 Pontiac Vibe uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 54.1mm and the offset is 40mm.
What other years of Pontiac Vibe have the same bolt pattern as the 2004?
The Pontiac Vibe uses the 5x100 pattern from 2003 through 2007. Wheels from any of these model years are dimensionally compatible with the 2004, provided the offset and center bore also match.
Do 2004 Pontiac Vibes use lug bolts or lug nuts?
The 2004 Vibe requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2004 Pontiac Vibe?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 40mm offset mean for the 2004 Vibe?
An offset of 40mm means the wheel's mounting surface is 40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Pontiac.
What is the PCD for a 2004 Pontiac Vibe?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2004 Vibe, the PCD is 5x100.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Pontiac Vibe has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 2003-2010 (8 model years).
- Observed bolt-pattern variants: 2 (5x100, 5x114.3).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2004 Pontiac Vibe, please report it via our About page contact so we can verify and update this record.