2006 Pontiac Vibe Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Pontiac Vibe, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 54.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2006 Vibe — Year-Specific Fitment Context
The 2006 Pontiac Vibe is in year 4 of 5 using the 5x100 pattern (2003–2007). Wheels from any 2003–2007 Pontiac Vibe are cross-compatible with the 2006 model. Across its full production run (2003–2010), the Vibe has also used: 5x114.3.
Pontiac Vibe Bolt Pattern by Year
The table below shows how the Vibe's wheel specifications have changed over the years. The 2006 model year is highlighted.
Fitment Notes
The 2006 Pontiac Vibe has a bolt pattern of 5x100.
This means it is a 5 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Pontiac Vibe appears from 2003 to 2010 (8 model years).
Across model years, this model appears with 2 bolt patterns (5x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
2006 Pontiac Vibe — Frequently Asked Questions
What is the bolt pattern for a 2006 Pontiac Vibe?
The 2006 Pontiac Vibe uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 54.1mm and the offset is 40mm.
What other years of Pontiac Vibe have the same bolt pattern as the 2006?
The Pontiac Vibe uses the 5x100 pattern from 2003 through 2007. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2006 Pontiac Vibe?
Absolutely. Just ensure the aftermarket wheels have a 5x100 bolt pattern, an offset near 40mm, and a center bore of at least 54.1mm (using hub rings if larger).
What lug nut size does the 2006 Pontiac Vibe use?
The 2006 Pontiac Vibe uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 2006 Pontiac Vibe?
Yes, but ensure the wheel spacers match the 5x100 bolt pattern and 54.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What is the PCD for a 2006 Pontiac Vibe?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2006 Vibe, the PCD is 5x100.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Pontiac Vibe has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 2003-2010 (8 model years).
- Observed bolt-pattern variants: 2 (5x100, 5x114.3).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2006 Pontiac Vibe, please report it via our About page contact so we can verify and update this record.