2016 Scion FR-S Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 Scion FR-S, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 48 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2016 FR-S — Year-Specific Fitment Context
The 2016 model year is the final year of the Scion FR-S's 5x100 bolt pattern run (since 2013). Wheels from any 2013–2016 Scion FR-S are cross-compatible with the 2016 model.
Scion FR-S Bolt Pattern by Year
The table below shows how the FR-S's wheel specifications have changed over the years. The 2016 model year is highlighted.
Fitment Notes
The 2016 Scion FR-S has a bolt pattern of 5x100.
This means it is a 5 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Scion FR-S appears from 2013 to 2016 (4 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
2016 Scion FR-S — Frequently Asked Questions
What is the bolt pattern for a 2016 Scion FR-S?
The 2016 Scion FR-S uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 48mm.
What other years of Scion FR-S have the same bolt pattern as the 2016?
The Scion FR-S uses the 5x100 pattern from 2013 through 2016. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
Do 2016 Scion FR-Ss use lug bolts or lug nuts?
The 2016 FR-S requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Why is matching the 56.1mm center bore important for the 2016 FR-S?
The 56.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I use spacers on my 2016 Scion FR-S?
Yes, but ensure the wheel spacers match the 5x100 bolt pattern and 56.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
What lug nut size does the 2016 Scion FR-S use?
The 2016 Scion FR-S uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Scion FR-S is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2013-2016 (4 model years).
- Observed bolt-pattern variants: 1 (5x100).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2016 Scion FR-S, please report it via our About page contact so we can verify and update this record.