2014 Scion FR-S Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Scion FR-S, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 48 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2014 FR-S — Year-Specific Fitment Context
The 2014 Scion FR-S is in year 2 of 4 using the 5x100 pattern (2013–2016). Wheels from any 2013–2016 Scion FR-S are cross-compatible with the 2014 model.
Scion FR-S Bolt Pattern by Year
The table below shows how the FR-S's wheel specifications have changed over the years. The 2014 model year is highlighted.
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 2014 Scion FR-S
The 2014 Scion FR-S uses a 5x100 bolt pattern with a 56.1mm center bore. When selecting aftermarket wheels, always use hub-centric rings to ensure the wheel is centered on the hub, preventing vibrations. The factory offset is 48mm; deviations beyond ±5mm may cause rubbing or clearance issues. For lug nuts, the thread pitch is 12x1.25, and the factory uses a conical (60-degree) seat. Using incorrect seat types (e.g., ball seat) can lead to wheel loosening. Always verify lug nut compatibility and torque to 80-90 ft-lbs. Wheels from 2013-2016 FR-S models are direct fit.
Historical Fitment Data Reference
In our dataset, Scion FR-S appears from 2013 to 2016 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on studs.
- ✅ Check inner clearance for wheels wider than 8.5 inches; offset near 35mm may require fender rolling.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 Scion FR-S — Frequently Asked Questions
What is the bolt pattern for a 2014 Scion FR-S?
The 2014 Scion FR-S uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 48mm.
What other years of Scion FR-S have the same bolt pattern as the 2014?
The Scion FR-S uses the 5x100 pattern from 2013 through 2016. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2014 Scion?
The 2014 FR-S uses a 5x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2014 Scion FR-S?
Absolutely. Just ensure the aftermarket wheels have a 5x100 bolt pattern, an offset near 48mm, and a center bore of at least 56.1mm (using hub rings if larger).
What lug nut size does the 2014 Scion FR-S use?
The 2014 Scion FR-S uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the center bore of a 2014 Scion FR-S?
The factory center bore (hub bore) for the 2014 Scion FR-S is 56.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset