2011 Ram Dakota Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Ram Dakota Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 18 |
| Center Bore (CB) | 77.8 mm |
| Offset (ET) | 25 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 5x139.7 is commonly referred to as 5x5.5" in US Standard.
2011 Dakota Crew Cab — Year-Specific Fitment Context
The 2011 is the only model year of the Ram Dakota Crew Cab in our database using the 5x139.7 bolt pattern.
5x139.7 Pattern Context
This bolt pattern appears on 261 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x139.7:
Expert Buying Guide for 2011 Ram Dakota Crew Cab
The 2011 Ram Dakota Crew Cab uses a 5x139.7 bolt pattern with a 77.8mm center bore. When selecting aftermarket wheels, ensure hub-centric rings are used to match the bore precisely; otherwise, vibrations and unsafe load distribution may occur. The offset is sensitive, with a recommended range of 25mm ±5mm; deviations can cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (9/16-18) and seat type (cone or ball seat) to prevent loosening. Improper lug nut seating is a safety hazard. Verify all fitment specifications before installation.
Historical Fitment Data Reference
In our dataset, Ram Dakota Crew Cab appears from 2011 to 2011 (1 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Check for brake caliper clearance when using wheels with offset less than 20mm.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and damage.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Ram Dakota Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2011 Ram Dakota Crew Cab?
The 2011 Ram Dakota Crew Cab uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 77.8mm and the offset is 25mm.
Can I put aftermarket wheels on my 2011 Ram Dakota Crew Cab?
Absolutely. Just ensure the aftermarket wheels have a 5x139.7 bolt pattern, an offset near 25mm, and a center bore of at least 77.8mm (using hub rings if larger).
How tight should I torque the lug nuts on a 2011 Ram Dakota Crew Cab?
Refer to your owner's manual for exact specs, but always tighten the 9/16 18 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another Ram fit my 2011 Dakota Crew Cab?
Only if they share the exact same 5x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 77.8mm.
What lug nut size does the 2011 Ram Dakota Crew Cab use?
The 2011 Ram Dakota Crew Cab uses 9/16 18 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Why is matching the 77.8mm center bore important for the 2011 Dakota Crew Cab?
The 77.8mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset