2014 Ram ProMaster 1500 Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Ram ProMaster 1500 Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 |
| Center Bore (CB) | 77.8 mm |
| Offset (ET) | 19 |
| Torque Specs | 140 ft-lbs (190 Nm) |
2014 ProMaster 1500 Cargo — Year-Specific Fitment Context
The 2014 is the only model year of the Ram ProMaster 1500 Cargo in our database using the 5x139.7 bolt pattern.
Fitment Notes
The 2014 Ram ProMaster 1500 Cargo has a bolt pattern of 5x139.7.
Imperial Conversion: This bolt pattern is commonly referred to as 5x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x5.5".
This means it is a 5 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Ram ProMaster 1500 Cargo appears from 2014 to 2014 (1 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x139.7 Pattern Context
This bolt pattern appears on 261 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x139.7:
2014 Ram ProMaster 1500 Cargo — Frequently Asked Questions
What is the bolt pattern for a 2014 Ram ProMaster 1500 Cargo?
The 2014 Ram ProMaster 1500 Cargo uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 77.8mm and the offset is 19mm.
What lug nut size does the 2014 Ram ProMaster 1500 Cargo use?
The 2014 Ram ProMaster 1500 Cargo uses 9/16 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another Ram fit my 2014 ProMaster 1500 Cargo?
Only if they share the exact same 5x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 77.8mm.
What is the PCD for a 2014 Ram ProMaster 1500 Cargo?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2014 ProMaster 1500 Cargo, the PCD is 5x139.7.
Can I use spacers on my 2014 Ram ProMaster 1500 Cargo?
Yes, but ensure the wheel spacers match the 5x139.7 bolt pattern and 77.8mm center bore. Also verify that you have enough thread engagement for your 9/16 hardware.
Can I put aftermarket wheels on my 2014 Ram ProMaster 1500 Cargo?
Absolutely. Just ensure the aftermarket wheels have a 5x139.7 bolt pattern, an offset near 19mm, and a center bore of at least 77.8mm (using hub rings if larger).
Fitment Checklist Before You Buy Wheels
- Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Ram ProMaster 1500 Cargo is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2014-2014 (1 model years).
- Observed bolt-pattern variants: 1 (5x139.7).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2014 Ram ProMaster 1500 Cargo, please report it via our About page contact so we can verify and update this record.