2014 Ram ProMaster 2500 Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Ram ProMaster 2500 Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 121.3 mm |
| Offset (ET) | 43 |
| Torque Specs | 140 ft-lbs (190 Nm) |
2014 ProMaster 2500 Cargo — Year-Specific Fitment Context
The 2014 is the only model year of the Ram ProMaster 2500 Cargo in our database using the 8x165.1 bolt pattern.
Fitment Notes
The 2014 Ram ProMaster 2500 Cargo has a bolt pattern of 8x165.1.
Imperial Conversion: This bolt pattern is commonly referred to as 8x6.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 8x6.5".
This means it is a 8 lug pattern with a circle diameter of 165.1mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Ram ProMaster 2500 Cargo appears from 2014 to 2014 (1 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
2014 Ram ProMaster 2500 Cargo — Frequently Asked Questions
What is the bolt pattern for a 2014 Ram ProMaster 2500 Cargo?
The 2014 Ram ProMaster 2500 Cargo uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 121.3mm and the offset is 43mm.
Why is matching the 121.3mm center bore important for the 2014 ProMaster 2500 Cargo?
The 121.3mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Do 2014 Ram ProMaster 2500 Cargos use lug bolts or lug nuts?
The 2014 ProMaster 2500 Cargo requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2014 Ram ProMaster 2500 Cargo?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2014 Ram ProMaster 2500 Cargo?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2014 ProMaster 2500 Cargo, the PCD is 8x165.1.
What does 43mm offset mean for the 2014 ProMaster 2500 Cargo?
An offset of 43mm means the wheel's mounting surface is 43mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ram.
Fitment Checklist Before You Buy Wheels
- Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Ram ProMaster 2500 Cargo is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2014-2014 (1 model years).
- Observed bolt-pattern variants: 1 (8x165.1).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2014 Ram ProMaster 2500 Cargo, please report it via our About page contact so we can verify and update this record.