2016 Rolls-Royce Dawn Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 Rolls-Royce Dawn, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.25 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 25 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2016 Dawn — Year-Specific Fitment Context
The 2016 model year marks the beginning of the Rolls-Royce Dawn's 5x112 bolt pattern era, which continued through 2021 (6 consecutive years). Wheels from any 2016–2021 Rolls-Royce Dawn are cross-compatible with the 2016 model.
Rolls-Royce Dawn Bolt Pattern by Year
The table below shows how the Dawn's wheel specifications have changed over the years. The 2016 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2016 Rolls-Royce Dawn
For your 2016 Rolls-Royce Dawn, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels require hub-centric rings to avoid vibration. The offset is sensitive; stick to 25mm to prevent rubbing or clearance issues. Always use 14x1.25 lug nuts with the correct seat (ball or cone) to ensure proper clamping and avoid wheel loosening. Never reuse old lug nuts; torque to manufacturer specs and re-torque after 50 miles.
Historical Fitment Data Reference
In our dataset, Rolls-Royce Dawn appears from 2016 to 2021 (5 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 Nm after 50 miles of driving.
- ✅ Use hub-centric rings with 66.6mm bore for aftermarket wheels.
- ✅ Avoid spacers; offset is already optimized at 25mm.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2016 Rolls-Royce Dawn — Frequently Asked Questions
What is the bolt pattern for a 2016 Rolls-Royce Dawn?
The 2016 Rolls-Royce Dawn uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 25mm.
What other years of Rolls-Royce Dawn have the same bolt pattern as the 2016?
The Rolls-Royce Dawn uses the 5x112 pattern from 2016 through 2021. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
What lug nut size does the 2016 Rolls-Royce Dawn use?
The 2016 Rolls-Royce Dawn uses 14x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2016 Rolls-Royce Dawn?
The OEM offset for the 2016 Dawn is typically around 25mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2016 Rolls-Royce Dawn?
The factory center bore (hub bore) for the 2016 Rolls-Royce Dawn is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2016 Rolls-Royce Dawn?
Refer to your owner's manual for exact specs, but always tighten the 14x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset