2019 Rolls-Royce Dawn Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Rolls-Royce Dawn, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.25 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 25 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2019 Dawn — Year-Specific Fitment Context
The 2019 Rolls-Royce Dawn is in year 4 of 6 using the 5x112 pattern (2016–2021). Wheels from any 2016–2021 Rolls-Royce Dawn are cross-compatible with the 2019 model.
Rolls-Royce Dawn Bolt Pattern by Year
The table below shows how the Dawn's wheel specifications have changed over the years. The 2019 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2019 Rolls-Royce Dawn
For the 2019 Rolls-Royce Dawn, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels must use hub-centric rings to ensure proper load distribution and prevent vibration. The offset is sensitive; stick to 25mm ±5mm to avoid rubbing or clearance issues. Always verify lug nut thread pitch (14x1.25) and seat type—use ball-seat lug nuts unless the wheel specifies conical. Re-torque after 50 miles of driving. Wheels from 2016–2021 Dawn models are direct fit.
Historical Fitment Data Reference
In our dataset, Rolls-Royce Dawn appears from 2016 to 2021 (5 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings for aftermarket wheels to match the 66.6mm bore; otherwise, vibrations may occur.
- ✅ Stick to offset 25mm ±5mm; deviations risk rubbing the fenders or brake calipers.
- ✅ Re-torque lug nuts to 140 Nm after 50 miles; use a torque wrench and check for ball-seat compatibility.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Rolls-Royce Dawn — Frequently Asked Questions
What is the bolt pattern for a 2019 Rolls-Royce Dawn?
The 2019 Rolls-Royce Dawn uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 25mm.
What other years of Rolls-Royce Dawn have the same bolt pattern as the 2019?
The Rolls-Royce Dawn uses the 5x112 pattern from 2016 through 2021. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
Will wheels from another Rolls-Royce fit my 2019 Dawn?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.6mm.
Can I put aftermarket wheels on my 2019 Rolls-Royce Dawn?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 25mm, and a center bore of at least 66.6mm (using hub rings if larger).
Can I use spacers on my 2019 Rolls-Royce Dawn?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 66.6mm center bore. Also verify that you have enough thread engagement for your 14x1.25 hardware.
Why is matching the 66.6mm center bore important for the 2019 Dawn?
The 66.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset