2006 Saab 9-7X Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Saab 9-7X, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x127 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 35 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2006 9-7X — Year-Specific Fitment Context
The 2006 Saab 9-7X is in year 2 of 5 using the 6x127 pattern (2005–2009). Wheels from any 2005–2009 Saab 9-7X are cross-compatible with the 2006 model.
Saab 9-7X Bolt Pattern by Year
The table below shows how the 9-7X's wheel specifications have changed over the years. The 2006 model year is highlighted.
Fitment Notes
The 2006 Saab 9-7X has a bolt pattern of 6x127.
This means it is a 6 lug pattern with a circle diameter of 127mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Saab 9-7X appears from 2005 to 2009 (5 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
6x127 Pattern Context
This bolt pattern appears on 49 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x127:
2006 Saab 9-7X — Frequently Asked Questions
What is the bolt pattern for a 2006 Saab 9-7X?
The 2006 Saab 9-7X uses a 6x127 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 35mm.
What other years of Saab 9-7X have the same bolt pattern as the 2006?
The Saab 9-7X uses the 6x127 pattern from 2005 through 2009. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
Why is matching the 78.1mm center bore important for the 2006 9-7X?
The 78.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2006 Saab 9-7X?
The OEM offset for the 2006 9-7X is typically around 35mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2006 Saab 9-7X?
Yes, but ensure the wheel spacers match the 6x127 bolt pattern and 78.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What is the center bore of a 2006 Saab 9-7X?
The factory center bore (hub bore) for the 2006 Saab 9-7X is 78.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Editorial Fitment Notes
Saab 9-7X is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2005-2009 (5 model years).
- Observed bolt-pattern variants: 1 (6x127).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2006 Saab 9-7X, please report it via our About page contact so we can verify and update this record.