1996 Saab 900 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1996 Saab 900, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x110 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.50 |
| Center Bore (CB) | 65.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1996 900 — Year-Specific Fitment Context
The 1996 Saab 900 is in year 2 of 4 using the 5x110 pattern (1995–1998). Wheels from any 1995–1998 Saab 900 are cross-compatible with the 1996 model. Across its full production run (1992–1998), the 900 has also used: 4x108.
Saab 900 Bolt Pattern by Year
The table below shows how the 900's wheel specifications have changed over the years. The 1996 model year is highlighted.
Fitment Notes
The 1996 Saab 900 has a bolt pattern of 5x110.
This means it is a 5 lug pattern with a circle diameter of 110mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Saab 900 appears from 1992 to 1998 (7 model years).
Across model years, this model appears with 2 bolt patterns (4x108, 5x110).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 1.0 mm
5x110 Pattern Context
This bolt pattern appears on 126 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x110:
1996 Saab 900 — Frequently Asked Questions
What is the bolt pattern for a 1996 Saab 900?
The 1996 Saab 900 uses a 5x110 bolt pattern (also called lug pattern or PCD). The center bore is 65.1mm and the offset is 40mm.
What other years of Saab 900 have the same bolt pattern as the 1996?
The Saab 900 uses the 5x110 pattern from 1995 through 1998. Wheels from any of these model years are dimensionally compatible with the 1996, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 1996 Saab 900?
Refer to your owner's manual for exact specs, but always tighten the B 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another Saab fit my 1996 900?
Only if they share the exact same 5x110 bolt pattern, a compatible offset, and a center bore equal to or larger than 65.1mm.
Can I put aftermarket wheels on my 1996 Saab 900?
Absolutely. Just ensure the aftermarket wheels have a 5x110 bolt pattern, an offset near 40mm, and a center bore of at least 65.1mm (using hub rings if larger).
How do I measure the bolt pattern on my 1996 Saab?
The 1996 900 uses a 5x110 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Saab 900 has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 1992-1998 (7 model years).
- Observed bolt-pattern variants: 2 (4x108, 5x110).
- Observed total offset span across years: 1.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1996 Saab 900, please report it via our About page contact so we can verify and update this record.