1993 Saab 900 Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 Saab 900, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 4x108
Lug Nut / Bolt Size B 14x1.50
Center Bore (CB) 65.1 mm
Offset (ET) 39
Torque Specs 100 ft-lbs (135 Nm)

1993 900 — Year-Specific Fitment Context

The 1993 Saab 900 is in year 2 of 3 using the 4x108 pattern (1992–1994). Wheels from any 1992–1994 Saab 900 are cross-compatible with the 1993 model. Across its full production run (1992–1998), the 900 has also used: 5x110.

Saab 900 Bolt Pattern by Year

The table below shows how the 900's wheel specifications have changed over the years. The 1993 model year is highlighted.

Year Bolt Pattern Center Bore Offset
1992 4x108 65.1 39
▸ 1993 4x108 65.1 39
1994 4x108 65.1 39
1995 5x110 65.1 40
1996 5x110 65.1 40
1997 5x110 65.1 40
1998 5x110 65.1 40

4x108 Pattern Context

This bolt pattern appears on 76 vehicles in our current database and is considered uncommon.

Examples of other vehicles using 4x108:

Expert Buying Guide for 1993 Saab 900

For your 1993 Saab 900, the 4x108 bolt pattern and 65.1mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset is sensitive: stock is 39mm; deviations affect handling and clearance. Always verify lug nut thread pitch (14x1.50) and seat type—Saab uses conical seats; using incorrect lug nuts can cause wheel loss. Wheels from 1992–1994 Saab 900 models are direct fit. Avoid 5x110 wheels from later years.

Historical Fitment Data Reference

In our dataset, Saab 900 appears from 1992 to 1998 (7 model years). Across model years, this model appears with 2 bolt patterns (4x108, 5x110).

  • Observed bolt-pattern variants for this model: 2
  • Observed center-bore variants for this model: 1
  • Observed lug-size variants for this model: 2
  • Observed total offset span across years: 1.0 mm

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

1993 Saab 900 — Frequently Asked Questions

What is the bolt pattern for a 1993 Saab 900?

The 1993 Saab 900 uses a 4x108 bolt pattern (also called lug pattern or PCD). The center bore is 65.1mm and the offset is 39mm.

What other years of Saab 900 have the same bolt pattern as the 1993?

The Saab 900 uses the 4x108 pattern from 1992 through 1994. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.

How tight should I torque the lug nuts on a 1993 Saab 900?

Refer to your owner's manual for exact specs, but always tighten the B 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

How do I measure the bolt pattern on my 1993 Saab?

The 1993 900 uses a 4x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.

What does 39mm offset mean for the 1993 900?

An offset of 39mm means the wheel's mounting surface is 39mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Saab.

Do 1993 Saab 900s use lug bolts or lug nuts?

The 1993 900 requires B 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

Need more vehicle fitment data?

Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.

Get the Full Dataset
Confidence Level
High
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-07-08

Saab 900 By Year

1992 1993 1994 1995 1996 1997 1998

Other Saab Models

9-2X 9-3 9-4X 9-5 9-7X 900 9000