2009 Saturn SKY Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 Saturn SKY, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x110 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 65.1 mm |
| Offset (ET) | 55 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2009 SKY — Year-Specific Fitment Context
The 2009 model year is the final year of the Saturn SKY's 5x110 bolt pattern run (since 2007). Wheels from any 2007–2009 Saturn SKY are cross-compatible with the 2009 model.
Saturn SKY Bolt Pattern by Year
The table below shows how the SKY's wheel specifications have changed over the years. The 2009 model year is highlighted.
5x110 Pattern Context
This bolt pattern appears on 126 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x110:
Expert Buying Guide for 2009 Saturn SKY
For your 2009 Saturn SKY, the 5x110 bolt pattern is shared with 2007-2008 models, but aftermarket wheels often require hub-centric rings to adapt the 65.1mm center bore—without them, vibrations and stress on lug studs can occur. The 55mm offset is critical; deviations beyond ±5mm may cause rubbing or clearance issues with suspension and fenders. Always use lug nuts with the correct 12x1.5 thread pitch and matching seat type (cone or ball) to prevent loosening or damage. Verify wheel load rating meets or exceeds OEM specs for safety.
Historical Fitment Data Reference
In our dataset, Saturn SKY appears from 2007 to 2009 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub rings; they can cause vibration and stud failure.
- ✅ Check inner clearance for aftermarket wheels—the SKY's tight rear suspension may require spacers or lower offset.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2009 Saturn SKY — Frequently Asked Questions
What is the bolt pattern for a 2009 Saturn SKY?
The 2009 Saturn SKY uses a 5x110 bolt pattern (also called lug pattern or PCD). The center bore is 65.1mm and the offset is 55mm.
What other years of Saturn SKY have the same bolt pattern as the 2009?
The Saturn SKY uses the 5x110 pattern from 2007 through 2009. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.
What does 55mm offset mean for the 2009 SKY?
An offset of 55mm means the wheel's mounting surface is 55mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Saturn.
Do 2009 Saturn SKYs use lug bolts or lug nuts?
The 2009 SKY requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 2009 Saturn SKY?
The OEM offset for the 2009 SKY is typically around 55mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another Saturn fit my 2009 SKY?
Only if they share the exact same 5x110 bolt pattern, a compatible offset, and a center bore equal to or larger than 65.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset